Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
bell housing question
Moderators: toaddog, Elmo, DUDELUX
bell housing question
do the hilux G52 5 speed and the r150 surf box share a common boltpattern where the bellhousing bolts to the gearbox? 7 bolts i think
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
I'm pretty sure they are different.. Not 100% though.
I know the G52 and W5x patterns are the same as I will be converting my 3Y to a 7M soon..
If the G and R patterns are the same then that's excellent because I'm not expecting my G52 to last too long behind the new motor!
I know the G52 and W5x patterns are the same as I will be converting my 3Y to a 7M soon..
If the G and R patterns are the same then that's excellent because I'm not expecting my G52 to last too long behind the new motor!
2" Spring Lift, Custom Rear with Swing-Away Spare, Rear Lokka & Awesome Black Sunnies!!
To-Do list:
Custom Sliders & Tube Winch Bar
2.5 litre Twin Turbo 6cyl Conversion
To-Do list:
Custom Sliders & Tube Winch Bar
2.5 litre Twin Turbo 6cyl Conversion
alan ill find out for sure this week and post it up so we all know 
some people say yes they are some say no and some well............
they say dumb looks are free of charge!!!!!lol
some people say yes they are some say no and some well............
they say dumb looks are free of charge!!!!!lol
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
yeah they are different, case of the R series is much larger than the G/W
i have a L motor to R box here if some one is interested
there are no bell housing to suit R series to M using the push type clutch either sadly
you can run the supra bell housing but you will need to machine it down as the supra r series (r154) has an inch longer input shaft, and run the supra pull type clutch as well, bit of a stuff around but can be done, i just did it myself
i machined 10mm off the front and 5mm out the back, which just gets the shaft in the spigot bearing
i have a L motor to R box here if some one is interested
there are no bell housing to suit R series to M using the push type clutch either sadly
you can run the supra bell housing but you will need to machine it down as the supra r series (r154) has an inch longer input shaft, and run the supra pull type clutch as well, bit of a stuff around but can be done, i just did it myself
i machined 10mm off the front and 5mm out the back, which just gets the shaft in the spigot bearing
Marks 4wd do an adaptor to fit R series (same as dyna pattern) to G52 or W-- bellhousing. it a plate thats bolts to the gear box and is tapped to G52 etc patten. The adator plate move gearbox back which means need to run bigger spigot bush(same lenght as adator plate!) Not cheap $400 or more a few years ago.
story this far is:
i have a marks adaptors bell housing to suit holden V8 to "hilux" box its been sitting around here for years and ill be stuffed if i can remember what box it fits.
from memory(not that good) the g52 and the R150 boxes only have 7 or 9 bolts but this has 12 holes drilled in it (gearbox side) it is an old school kit as it is marked MFC not MFK as currently used. so even allowing for dowels it may fit both or neither(dyna????)
i thought that dynas ran same box as coater bus and therefore h series cruiser style bolt pattern?
i am hoping it will fit a r150 box as that is the box i would like to use but wont know untill my mate pulls the box out for me from the wreck i sold him if not i still have the g52 but it wont last long behind the v8
so i would like to do the job right first time but would also like to save the $750 for the bellhousing kit if i can.......
time will tell i supppose
i have a marks adaptors bell housing to suit holden V8 to "hilux" box its been sitting around here for years and ill be stuffed if i can remember what box it fits.
from memory(not that good) the g52 and the R150 boxes only have 7 or 9 bolts but this has 12 holes drilled in it (gearbox side) it is an old school kit as it is marked MFC not MFK as currently used. so even allowing for dowels it may fit both or neither(dyna????)
i thought that dynas ran same box as coater bus and therefore h series cruiser style bolt pattern?
i am hoping it will fit a r150 box as that is the box i would like to use but wont know untill my mate pulls the box out for me from the wreck i sold him if not i still have the g52 but it wont last long behind the v8
so i would like to do the job right first time but would also like to save the $750 for the bellhousing kit if i can.......
time will tell i supppose
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
The Dyna box is the same bolt pattern as the R series box.
The old style bellhousing may have been drilled for both boxes (hope so) and you will easily tell once you get the R-151 and don't bother putting the G52 box behind the V8 as they go bang far to often.
The 7mgte motor is an awesome engine, I ran a modded turbo Supra for years and once you put a cometic head gasket with ARP head studs then they are ultra reliable (500hp is a walk in the park for these motors).
I would advise to do the head gasket & head stud upgrade before you put it in the Runner.
The old style bellhousing may have been drilled for both boxes (hope so) and you will easily tell once you get the R-151 and don't bother putting the G52 box behind the V8 as they go bang far to often.
The 7mgte motor is an awesome engine, I ran a modded turbo Supra for years and once you put a cometic head gasket with ARP head studs then they are ultra reliable (500hp is a walk in the park for these motors).
I would advise to do the head gasket & head stud upgrade before you put it in the Runner.
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
Andrew
----------------------
Just a few mods, nothing over the top.:)
g52 should last i while if you go easy on it, there are a lot of v8s out there with them behind them, saying this tho most are only 253s, its the diesels that brake them most of the time, must be something about the way the power is delivered, v8 will be smoother where a diesel more like a rattle gun lol
if ya going to give it hell go r series for sure
yeah go arp head studs for sure in the 7m, cometics are really good too, but dear, i only put a toyota one in mine
if ya going to give it hell go r series for sure
yeah go arp head studs for sure in the 7m, cometics are really good too, but dear, i only put a toyota one in mine
Sorry for the gradual Hi-Jack Hiluxmad!!
Yeah, well aware of the BHG tendencies of the ol 7M..
While it's sitting on the ground it's gonna get the treatment
Getting frustrated coz have to wait for my new house to be built before commencement of conversion due to a total lack of shedness
Hiluxmad - Your 'bitsa' project sounds good mate.. I'm thinking i might go nissan or 80 series diffs in the future for the extra track and rear discs
Good luck with the build mate!
Alan
Yeah, well aware of the BHG tendencies of the ol 7M..
While it's sitting on the ground it's gonna get the treatment
Getting frustrated coz have to wait for my new house to be built before commencement of conversion due to a total lack of shedness
Hiluxmad - Your 'bitsa' project sounds good mate.. I'm thinking i might go nissan or 80 series diffs in the future for the extra track and rear discs
Good luck with the build mate!
Alan
2" Spring Lift, Custom Rear with Swing-Away Spare, Rear Lokka & Awesome Black Sunnies!!
To-Do list:
Custom Sliders & Tube Winch Bar
2.5 litre Twin Turbo 6cyl Conversion
To-Do list:
Custom Sliders & Tube Winch Bar
2.5 litre Twin Turbo 6cyl Conversion
Who is online
Users browsing this forum: No registered users and 3 guests