Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Scud Proof.

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Scud Proof.

Post by xtreem »

Put my new series 3 transfer gears in today, with the help of Nelligen (thanks). Here is a couple of photo's of our SCUD PROOF arms and mounts.
Top
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Post by xtreem »

A few more.
Top
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Post by xtreem »

Last ones.
Top
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Post by xtreem »

We also modified the selector forks so you can use 2wd low. Without turning the front drive shaft.
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

a word of warning with urethane bushes might be to har and cause u lots of vibes, i no this from experience.. :D
Top
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Post by xtreem »

No problems so far, its as smooth as stock. actually smoother as its taken all the sloop out of the driveline, caused by the transfer flooping around on the rubber mounts.

I also have a total of 80mm of urethane on each bolt so it still has some movement, cushoning.
Top
Posts: 160
Joined: Thu Feb 19, 2004 9:32 pm
Location: Nelligen via Batemans Bay

Post by nelligen »

bazooked wrote:a word of warning with urethane bushes might be to har and cause u lots of vibes, i no this from experience.. :D
Bazooked xtreem has urethane bushes in place of the original mounts plus 1 on top and 1 below the mounting arms with a 100mm x 10 mm bolt going thru them , is this how you did it ?? we were a bit concerned about vibes when we fitted them but so far there working well with no vibes to be felt ,even when touching the gear lever you can't feel any
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests