Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

winch mounting

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 35
Joined: Fri Mar 06, 2009 10:54 pm
Location: gold coast

winch mounting

Post by fiftyfrenzy »

hey just after a bit of help i have got one of those aldi winches. But i am having trouble mountingit . Can i rotate the clutch leaver to face upwards when the winch is mounted to the bar???,
as it is making things very hard to install and will be difficult to operate as it is at the moment ( at the moment its facing in towards the radiator).

just need some advice on how i can rotate the winch around...
Have been looking throught a 4wd action winch instalation write up and dosnt say anything about rotating winch but i have heard of it. but cant find any info on it.

cheers guys
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

usualy the bolts holding it to the drum are undone, then its taken off and rotated then put back on where you want it
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 35
Joined: Fri Mar 06, 2009 10:54 pm
Location: gold coast

Post by fiftyfrenzy »

cheers mate rotated the drum around this arvo.

but now i have run into another problem, the winch is going on my hilux and im not completely sure how or where i am going to mount my control box as it dosnt fit behind the bullbar???
any sugestions or pics? and did you guys have to make your own mounting brackets?
Top
Posts: 310
Joined: Fri May 25, 2007 12:16 am
Location: at the shed gympie

Post by scuba steve 22 »

i mounted mine to the grill on my 60 series.
i used some large zip ties.stayed there no worrys
hope it helps
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

You can move the control box to under the bonnet if you like and extend the wiring, just did this in my sierra and extended lines by about 2'.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Posts: 35
Joined: Fri Mar 06, 2009 10:54 pm
Location: gold coast

Post by fiftyfrenzy »

ok thanks guys will have a nother look now
Top
Posts: 123
Joined: Thu Apr 03, 2008 11:23 am
Location: mooroolbark Victoria

Re: winch mounting

Post by tigerz11 »

fiftyfrenzy wrote:hey just after a bit of help i have got one of those aldi winches. But i am having trouble mountingit . Can i rotate the clutch leaver to face upwards when the winch is mounted to the bar???,
as it is making things very hard to install and will be difficult to operate as it is at the moment ( at the moment its facing in towards the radiator).

just need some advice on how i can rotate the winch around...
Have been looking throught a 4wd action winch instalation write up and dosnt say anything about rotating winch but i have heard of it. but cant find any info on it.

cheers guys
http://www.youtube.com/watch?v=Nt-VpTs4AUY
Top
Posts: 35
Joined: Fri Mar 06, 2009 10:54 pm
Location: gold coast

Post by fiftyfrenzy »

cheers mate never even thought of youtube will keep that in mind
Top
Posts: 35
Joined: Fri Mar 06, 2009 10:54 pm
Location: gold coast

Post by fiftyfrenzy »

thanks heaps for the advice guys the winch is now in and all good to go thanks again.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 64 guests