Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Link material

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Link material

Post by Z()LTAN »

I can get a hold of some 60mm OD 40mm ID pipe real cheap, not sure if its MS or 4140 but its real heavy lol...


I know its prolly overkill but so is my truck, will these heavy links cause any unwanted problems?

Cheers fellas
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Posts: 644
Joined: Wed Sep 01, 2004 3:11 pm
Location: N.S.W

Post by tuf045 »

what sort of ends do you plan on using? bushes or rod ends? cause if you use somthing like a gq control arm bush you will have to flaten the pipe to weld it on because they are only around 45mm's wide. with rod ends you will have to make you own weld in bungs.
Reptile fabrication.
www.agroautomotive.net
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

10mm wall may not be enough.


tuf045, get back under that blue truck and keep on welding! no lunch breaks for you :D
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: Bing [Bot] and 1 guest