Outer Limits 4x4 Board

I can get a hold of some 60mm OD 40mm ID pipe real cheap, not sure if its MS or 4140 but its real heavy lol...


I know its prolly overkill but so is my truck, will these heavy links cause any unwanted problems?

Cheers fellas

what sort of ends do you plan on using? bushes or rod ends? cause if you use somthing like a gq control arm bush you will have to flaten the pipe to weld it on because they are only around 45mm's wide. with rod ends you will have to make you own weld in bungs.

10mm wall may not be enough.


tuf045, get back under that blue truck and keep on welding! no lunch breaks for you