Outer Limits 4x4 Board

would the disc brake caliper from a trailer set up be strong enough?
mounts etc will be fabricated to suit but would the clamping presure be enough?
vehicle is a dual cab lux 94 model

hiluxmad wrote:would the disc brake caliper from a trailer set up be strong enough?
mounts etc will be fabricated to suit but would the clamping presure be enough?
vehicle is a dual cab lux 94 model

i would say yes.
i used one from a go kart on my suzuki (mud4b was not small, actually it was bigger than most hilux's) with 37" tyres and it never let go. the thing you need to watch is if your rear diff is not locked and 1 wheel has bugger all weight on it, you will most likely loose your truck.

cheers mark.

use a willwood one. they are cheap as.

I'll try find the link later for the cable only. think it was <$100

here it is fella:

http://www.jegs.com/p/Wilwood/Wilwood-M ... 9/10002/-1

I would use this though:

hydro / cable - sweet for handbrakies

http://www.polyperformance.com/shop/Wil ... 20002.html

bru21 wrote:use a willwood one. they are cheap as.

I'll try find the link later for the cable only. think it was <$100

here it is fella:

http://www.jegs.com/p/Wilwood/Wilwood-M ... 9/10002/-1

I would use this though:

hydro / cable - sweet for handbrakies

http://www.polyperformance.com/shop/Wil ... 20002.html

nice find.
cheers mark.