Page 1 of 1
thread/fitting for oil drain and oil feed
Posted: Tue Aug 04, 2009 5:07 pm
by tye1986
been searching for what size and thread fittings i will need for the oil drain and feed im useing the one from the filter houseing/oil pump and using the grub in the exhaust side of the block as the return. just wanting to get all the parts and fittings before i start to pull it apart so your help would be great cheers tye.
Posted: Tue Aug 04, 2009 5:41 pm
by shw337
mate the grub screw you are wantin to use as a drain on the exhaust side, can-not be used as a drain as that is the usual oil feed point.
so ur better of taking you oil feed from there and tapin a hole ine the sump for your drain. or if your after a dodgy but still works theme, you can use a 'T' peice off the altinator drain as a drain.
each to their own....
p.s use the search button