Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

injection ecu conversion

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

injection ecu conversion

Post by UrbanRedneck »

Hey there guys i have heard of using the delco remy ecu from holden v8, and am wondering if anyone has any info or can point me in the direction of some info.
I am wanting to do this if possible to my 91 classic with 3.9 so as to do away with airflow meter and such. I also have all the injection parts loom computer etc. already laying around.
Any help appreciated thanx in advance.
Damo
have grinder will fit
www.4Bfabrications.com.au
Top
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

fooly sik injection....Noooice!
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

You'll still need the AFM with the delco ecu unless it uses a MAP sensor, just go an aftermarket ecu or a megasquirt.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 1575
Joined: Thu Dec 28, 2006 6:50 pm
Location: Moronfield....

Post by nottie »

Commos use a MAP sensor
Top
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

Post by UrbanRedneck »

ye the commo v8 runs a map sensor.

I would go after market if i could afford it and as i have already got all the commodore stuff well i guess that makes it cheap.

I am sure i heard about someone doing this.
have grinder will fit
www.4Bfabrications.com.au
Top
Posts: 64
Joined: Wed Oct 19, 2005 12:37 pm
Location: Stockton

Post by qserv »

Ive got a mate who runs a V6 delco on a holden straight 6, i had planned on doing the delco on my p76 motor, but ive gone for the LS1 now. I cant remember the exact plan(i was picking my mates brain for ideas) but it was going to use the MAP sensor tapped into the manifold somewhere, parts of a camira dizzy, the holden injectors and sensors, then use the holden v8 tune modified to suit the p76 motor, this is basically what my mate did to get the delco running on the straight 6 and it runs really well.
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

Joel at PGS has done lots like this as well as aftermarket.

Other benefit is that he actually uses his truck in comps and hard off road so understands what is needed.
Top
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

Post by UrbanRedneck »

awsome thanx guys i was told to try joel already so think i must be giving him a call soon.
Thanx for the info.
have grinder will fit
www.4Bfabrications.com.au
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests