i need the wiring diagram for a gu td28 the main ecu harness or at least the wiring for the crank sensor out of the ecu as i have put a td42T in its place and am wishing to use the tacho in dash as it runs from the crank sensor on the td28.
also any assistance from some one who has done this conversion before
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
02 td42T into 98 td28T gu series 1 wagon
02 td42T into 98 td28T gu series 1 wagon
GU Twin cab TD42T compound turbos
lwb sierra ca18det, 37" "CANT HOLD ON"
lwb sierra g16a, daily driver
https://www.suspensionstuff.com.au/shop/
lwb sierra ca18det, 37" "CANT HOLD ON"
lwb sierra g16a, daily driver
https://www.suspensionstuff.com.au/shop/
ok do you know what wires from the computer runs to the dash to make the tacho, temp, oil pressure work ? so as we can tap in to them with out having to pull the dash apart ?
GU Twin cab TD42T compound turbos
lwb sierra ca18det, 37" "CANT HOLD ON"
lwb sierra g16a, daily driver
https://www.suspensionstuff.com.au/shop/
lwb sierra ca18det, 37" "CANT HOLD ON"
lwb sierra g16a, daily driver
https://www.suspensionstuff.com.au/shop/
Who is online
Users browsing this forum: No registered users and 2 guests