Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gti twin cam conversion. wireing diagram?
gti twin cam conversion. wireing diagram?
hey im currently changing the motor in my 96 sierra to a g13b twin cam. i have found lots of info on here but im struggling to find wireing diagrams. if anyone could help out with info on the best way about it that would be great.
Hey,
You will need the gti engine loom and part of the gti body loom, its not that hard you can download a gti manual mk3 from suzukiinfo.com.
The engine loom pretty much stays complete, there are a few wires in it the you dont need. The only part of the dash loom you need is the coil/igniter and ecu plug. most of the dash loom goes in the bin.
You need to give the ecu a start/ ignition/constant power, plus a couple of other things eg VSS.
Have a look for a suzuki gt manual on the net, as the american model is called a GT not a GTi.
You will need the gti engine loom and part of the gti body loom, its not that hard you can download a gti manual mk3 from suzukiinfo.com.
The engine loom pretty much stays complete, there are a few wires in it the you dont need. The only part of the dash loom you need is the coil/igniter and ecu plug. most of the dash loom goes in the bin.
You need to give the ecu a start/ ignition/constant power, plus a couple of other things eg VSS.
Have a look for a suzuki gt manual on the net, as the american model is called a GT not a GTi.
Who is online
Users browsing this forum: No registered users and 79 guests