Page 1 of 1
gti twin cam conversion. wireing diagram?
Posted: Wed Aug 19, 2009 4:24 pm
by leary393
hey im currently changing the motor in my 96 sierra to a g13b twin cam. i have found lots of info on here but im struggling to find wireing diagrams. if anyone could help out with info on the best way about it that would be great.
Posted: Thu Aug 20, 2009 5:48 pm
by 6rxhx
Hey,
You will need the gti engine loom and part of the gti body loom, its not that hard you can download a gti manual mk3 from suzukiinfo.com.
The engine loom pretty much stays complete, there are a few wires in it the you dont need. The only part of the dash loom you need is the coil/igniter and ecu plug. most of the dash loom goes in the bin.
You need to give the ecu a start/ ignition/constant power, plus a couple of other things eg VSS.
Have a look for a suzuki gt manual on the net, as the american model is called a GT not a GTi.