Ok i have my wheel off have undone the 6 allen key bolts to pull the hub selecter dial thing off. Have taken the big circlip thing off the spline. Have undone the 6 big bolts holding the disk rotor on. I still cant seem to pull anything off. What am i missing?
Please help
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Changing front brake disks on gq. How the Hell??
Depending on hyow long they have been on the hub and how much salt they have seen, it can be a pita to get them off the hub. I had to press mine off with 1500 lbs pressure, some light taping and a lot of WD40. Before putting new ones on the hub, clean off all the scale. I also paint my hub with antisieze compound - for the next time. Here in Canada, salt is unavoidable in the winter where i live.
Who is online
Users browsing this forum: No registered users and 105 guests