Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rims where to get them

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 91
Joined: Sun Jun 29, 2008 8:12 pm
Location: sydney

rims where to get them

Post by zoook »

looking in sydney to buy some 16x8 -34mm or abouts rims sunraysia type steel to fit 6 stud cruiser and i need 6......have rung a few places they are proving harder to get than what i thought ......16x 8 sure there like bums everyone has them in 0 offset but i need at least -30 ....who will have them
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

try speedy direct see if they do the offset and then find a speedy reseller

http://www.speedywheels.com.au/steel.htm
Top
Posts: 228
Joined: Sat Jun 06, 2009 11:22 am
Location: GLADSTONE QUEENSLAND

Post by YN67highlux »

http://www.acetyresandauto.com.au/
88 hilux - 3rz+ locked
04 prado - that has a second home called toyota service dept
94 comp truck hilux - in the making....
Top
Posts: 478
Joined: Tue Jul 18, 2006 8:43 pm
Location: outer east Melb.

Contact:
Contact MUD EMPIRE

Post by MUD EMPIRE »

Speedy wheels do a neg28 16x8, but it is reverse offset (that is the centre is welded in backwards to gain the neg28). These wheels can not be beadlocked, but are ok for general use.
Top
Posts: 243
Joined: Thu Jul 15, 2004 9:21 am
Location: Townsville

Post by Dane »

Check the runout on Speedy rims before you pay for them. I tried two sets of six that were TERRIBLE.
Top
Posts: 91
Joined: Sun Jun 29, 2008 8:12 pm
Location: sydney

rims

Post by zoook »

thanks folks wheels on the way.....local dealer and what i thought was pretty cheap ..80 a rim
Top
Posts: 899
Joined: Mon Jan 01, 2007 8:11 am
Location: West Seedknee

Post by 4bdan »

Your probably going to have to pay the extra and get some procomp's or something.

Try this site
http://www.procomp.com.au/Default.asp?M ... CK_CRAWLER
On the left side of the page it says "retailers", click on that and you should be able to find a dealer not too far away.
Back in a Lux again...
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests