Page 1 of 1
rims where to get them
Posted: Sat Aug 22, 2009 9:51 am
by zoook
looking in sydney to buy some 16x8 -34mm or abouts rims sunraysia type steel to fit 6 stud cruiser and i need 6......have rung a few places they are proving harder to get than what i thought ......16x 8 sure there like bums everyone has them in 0 offset but i need at least -30 ....who will have them
Posted: Sat Aug 22, 2009 10:15 am
by Tiny
try speedy direct see if they do the offset and then find a speedy reseller
http://www.speedywheels.com.au/steel.htm
Posted: Sat Aug 22, 2009 10:57 am
by YN67highlux
Posted: Sat Aug 22, 2009 11:26 am
by MUD EMPIRE
Speedy wheels do a neg28 16x8, but it is reverse offset (that is the centre is welded in backwards to gain the neg28). These wheels can not be beadlocked, but are ok for general use.
Posted: Sat Aug 22, 2009 10:41 pm
by Dane
Check the runout on Speedy rims before you pay for them. I tried two sets of six that were TERRIBLE.
rims
Posted: Mon Aug 24, 2009 11:46 pm
by zoook
thanks folks wheels on the way.....local dealer and what i thought was pretty cheap ..80 a rim
Posted: Tue Aug 25, 2009 6:29 am
by 4bdan
Your probably going to have to pay the extra and get some procomp's or something.
Try this site
http://www.procomp.com.au/Default.asp?M ... CK_CRAWLER
On the left side of the page it says "retailers", click on that and you should be able to find a dealer not too far away.