Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

what guage

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 8
Joined: Tue Aug 26, 2008 9:58 pm
Location: SE QLD

what guage

Post by GUTROLL »

hi, what type of boost guage do i need for a 2008 gu commonrail 3ltr. manual ( tubed type ) or electrical ? thanks, steve.
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

Same same really. I've found the mechanical ones easier to diagnose faults with, and are a bit more responsive than electronic units. I've never had any issues with the mechanical type.

Make sure you get a decent one - no cheap chinese crap. Get a brand name (VDO, Speco, Autometer etc)
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Re: what guage

Post by Skegbudley »

GUTROLL wrote:hi, what type of boost guage do i need for a 2008 gu commonrail 3ltr. manual ( tubed type ) or electrical ? thanks, steve.
You need one that goes to 30PSI.
I run the Autometer one. Matches the EGT gauge too.
GU Patrol with go better bits added
Posts: 8
Joined: Tue Aug 26, 2008 9:58 pm
Location: SE QLD

Post by GUTROLL »

thanks guys goin auto meter
Posts: 413
Joined: Sun Apr 27, 2008 8:41 am
Location: South Is, NZ

Post by twodiffs »

So Autometer is pretty good and accurate for a brand then???

I've looked at them in Repco etc and they are way cheaper than VDO or anything...which just made me think they were dodgy :roll:

If not then i'll feel better about buying a water temp and oil pressure gauge.
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Post by Skegbudley »

twodiffs wrote:So Autometer is pretty good and accurate for a brand then???

I've looked at them in Repco etc and they are way cheaper than VDO or anything...which just made me think they were dodgy :roll:

If not then i'll feel better about buying a water temp and oil pressure gauge.
Yeah mate. Autometer are pretty good.
GU Patrol with go better bits added
Posts: 64
Joined: Sat Aug 25, 2007 8:54 pm
Location: Blackwater, QLD

Post by ShaneGQ »

Where is the best place in Brissy to get the guages fitted?
2002 GU 3lt wagon 5" lift, reduction gears, 35" MTZ...
'94 Suzuki Sierra SWB 5" lift, 30" MT 's and a winch to pull the bigger trucks through....
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

lol funny, autometer was one of the most inaccurate pieces of SHlT tested, its popular because muzzas and ricers use them due to their finish.....pretty sure autospeed had a thorough test.
My bitch has boost, Nutter Engineering Turbo GQ
Posts: 413
Joined: Sun Apr 27, 2008 8:41 am
Location: South Is, NZ

Post by twodiffs »

NutterGQ wrote:lol funny, autometer was one of the most inaccurate pieces of SHlT tested, its popular because muzzas and ricers use them due to their finish.....pretty sure autospeed had a thorough test.
Oh good on ya Nutter...now i'm back to square 1. :rofl:
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

sorry dude if accuracy means more than chrome and carbon fibre you need to look else where lol
My bitch has boost, Nutter Engineering Turbo GQ
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

My bitch has boost, Nutter Engineering Turbo GQ
Posts: 580
Joined: Mon Jul 18, 2005 5:53 pm
Location: Toowoomba QLD

Post by mud_runner_GQ »

auto meter boost gauges are crap!
go VDO or stuwart warnner. ;)
RIP BAXTER YOUR IN OUR HEARTS FOREVER
Vehicle: Red shorty short gq patrol..... with a bucket of cash spent on it
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

ShaneGQ wrote:Where is the best place in Brissy to get the guages fitted?
Don't be a slack arse - DIY!!!!
Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests