Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Balloned oil filter on a hj60

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 32
Joined: Sun Sep 28, 2008 11:08 pm
Location: Central Victoria

Balloned oil filter on a hj60

Post by Kruzeruzer »

Think I might have oil pressure issues in my hj60 2h got home last night only to find that the 60 had pumped all but a couple of ltrs of oil all over the engine bay and the ground. Removed the oil filter and noticed the top of it has balloned outwards it appears to have been leaking oil around the seal of the filter for a little while. Could it be the pressure relief valve?? Any other suggestions as to what may have caused this greatly appreciated. I live in the sticks so difficult to get a mechanical diagnosis. I use castrol RX super and service the old girl myself shes only done 259000.
Tony :?
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

This is pretty common, I believe its a stuck/faulty oil pressure relief valve. Try doing a search it has been covered a few times.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests