Correct me if I'm wrong here. I'm sorting out oil lines for my TB42 strait gas turbo set-up.
Can any1 tell me what the other bungs in the side of the block are for?
I have in my head a distant memory of working on a standard VL turbo. that the oil feed, drain and water come from the block.
I understand the top one will be oil feed to turbo, But could either of the other 2 be used for an oil drain on a high mount set-up.
This would prevent removal of sump to put oil drain in.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I have a question that I need answered fast. Turbo Oil lines
The oil pressure feed is at the rear under exhaust port no.6 Oil drain to the sump(have to make) close to the pan rail, no pressure. One water hose, pressure can come from the factory water drain plug, just forward of the oil feed.
Joel
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Who is online
Users browsing this forum: No registered users and 4 guests