gday guys just at the next stage of my drawers for the gq. Now runners are next, ive seen heaps around on ebay, what have you guys used? what works good?
most importantly im in sydney where can i get a couple pairs of these local? need to be 100kg rated
cheers dez
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Draw runners what and where
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Draw runners what and where
95 GQ td42
3"lift 33 claws
covered in mud
3"lift 33 claws
covered in mud
Draw runners
try a company called Hafele, they have a range of types and sizes. Also have an online catalogue with all the runner details.
interesting you say that. At work they are getting rid of lots or racking runners, not bearings but rollers so would be great to see some pics of your set up. cheersledgend80 wrote:hey dez the best way to get some heavy duty draw slides is to get a bit of rhs on either side of your draw and then run some bearings top and bottom of the rhs this is what is done on my draws that are in the back of my 80 series if you need some pics to see what i mean let me know
cheers lee
95 GQ td42
3"lift 33 claws
covered in mud
3"lift 33 claws
covered in mud
Road Ranger
sounds like a lot of work, the hafele roller bearings are pre made to a bunch of sizes and just screw / bold inDEZ wrote:interesting you say that. At work they are getting rid of lots or racking runners, not bearings but rollers so would be great to see some pics of your set up. cheersledgend80 wrote:hey dez the best way to get some heavy duty draw slides is to get a bit of rhs on either side of your draw and then run some bearings top and bottom of the rhs this is what is done on my draws that are in the back of my 80 series if you need some pics to see what i mean let me know
cheers lee
Re: Draw runners
Good company that. Ive worked on theyre coach a bit. They spend quite a bit of money every year fitting out a coach with all theyre latest kitchen stuff, then drive it around Australia showing it off.stinger wrote:try a company called Hafele, they have a range of types and sizes. Also have an online catalogue with all the runner details.
Anyway yeh as someone mentioned before, use some RHS, and buy a bulk pack of rollerblade bearings off ebay and run it in them. Works a treat.
i used ovesco when i did my draws. http://www.ovesco.com.au/
plenty of other handy hardware.
plenty of other handy hardware.
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295
bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
x2... Bloody good gear!sprungupcruiser wrote:i used ovesco when i did my draws. http://www.ovesco.com.au/
plenty of other handy hardware.
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
Who is online
Users browsing this forum: No registered users and 101 guests