Outer Limits 4x4 Board

i am doing a conversion from a tb42 to a td 42t i would just like to know what has to be done to use my original gearbox and do the diff ratios have to be changed

either drill and tap a hole for the starter motor or get a diesel bellhousing, u can keep the petrol box, 4.1 diff gears will be fine. wat size tyre are you running?

waandy wrote:either drill and tap a hole for the starter motor or get a diesel bellhousing, u can keep the petrol box, 4.1 diff gears will be fine. wat size tyre are you running?

I was going to run a set of 33,s do you think that would be ok

brendo4b wrote:

waandy wrote:either drill and tap a hole for the starter motor or get a diesel bellhousing, u can keep the petrol box, 4.1 diff gears will be fine. wat size tyre are you running?

I was going to run a set of 33,s do you think that would be ok

yes 4.1s will be fine. i run 35s with 4.1s it turns em fine but 4.6's would be better