Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Replacing all fluids. Diesel 100 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 227
Joined: Thu Dec 18, 2008 7:51 am
Location: Qld

Replacing all fluids. Diesel 100 series

Post by crunk81us »

I'm wanting to change all the fluids in the cruiser. Everything. Diffs, box, xfer, engine, brakes, radiator... I am after some opinions on what I should be putting in there. I want some good protection from wear, and preferably long lasting, and not ridiculously expensive. Some less friction to allow a little more power/economy would be a bonus :)
Posts: 729
Joined: Sat Aug 07, 2004 11:42 pm
Location: Maitland

Post by revin »

Seems you should only put DOT 3 brake fluid in from Toyota.Anything else wears seals out.More info on the LCOOL forums
2001 100 series stock as a rock
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Post by +dj_hansen+ »

There have been a number of threads on this, do a search for VMX-M, J-Max, Dot 3, LSX-90, Delvac.

In short:
Engine - Castrol J-Max, RX Super, or Caltex Delo 400
Gearbox - VMX-M
Transfer - VMX-80
Diffs - Lim Slip for rear, normal for front
Brake Fluid - Dot 3 only, Toyota is the same price as other brands
Coolant - Toyota Long Life Red
Grease - Moly grease for CV's, a good quality HTB grease for shafts/wheel bearings, and some white lithium/graphite powder for latches, strikers etc.
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests