Outer Limits 4x4 Board

I would like to put the draglink under the pitman arm like a GQ, I know people have done this to an MQ/MK pitman arm and was wondering what is involved in doing this?. And would a GQ pitman arm fit an MK power steer box??

Cheers
Hoppy

99% sure that a GQ arm wont fit the MQ / MK box

Re-drill the MQ arm from the bottom side to take a larger ball joint, Toyota make a large taper ball joint that also screws to the MQ link.
From memory the larger part of the MQ taper is the same size as the small part of the taper on the yota ball joint.....

sorry cant recall the yotas part number but most auto shops or even a toyota dealership will be able to help you out

V8Patrol wrote:99% sure that a GQ arm wont fit the MQ / MK box

I'm 100% sure - compared them once - GQ spline count is much bigger

Or just ft a GQ steer box like i did.. Plenty more non leaky gq boxes about

Sterlo