Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

diesel conversion, where do i swap the looms from?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 388
Joined: Wed May 14, 2008 6:01 pm
Location: the sticks gippsland

diesel conversion, where do i swap the looms from?

Post by waandy »

im slowly stripping my diesel wagon down for yhe conversion to my swb (wagon was rolled) and i want to know where to pull the loom out from? do i pull it out from under the passenger seat and then through the dash?
85 hi top drover, 31s, 2 inch exended shackles 2 inch bl.
88 tb42 swb mav,35 claws, 4 inch lift
Top
JBE
Posts: 258
Joined: Tue Oct 07, 2003 2:39 pm
Location: Sydney

.

Post by JBE »

You will have to remove the dash. Once the dash is out of the way it's pretty easy to remove the loom. The loom continues into the engine bay near the steering column (all the way to the passenger side). It's all one piece which is about 6m long from memory. Make sure you mark all the connectors and their position in the cabin and especially in the engine bay.

Hope that helps
J
Top
Posts: 4323
Joined: Wed Dec 11, 2002 8:42 am
Location: Gold Coast, Queensland

Contact:
Contact HeathGQ

Post by HeathGQ »

yeah pull the dash out... its easier without a windscreen too. The whole lot then pulls through the firewall. Do the reverse when you put it in the new car. You'll be surprised at how easy it all is to set-up.
Heath & Melissa - 93 GQ LWB.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests