G'day,
I've got an 80 series which was 1hz powered but is now going to LS1. What's the best way to set up the fuel system in this? I have the stock twin fuel tanks that the 80's normally have.
Should I do a surge tank set up? If so what type of fuel pumps would I need to keep the fuel up to the v8 at the right pressure?
Or should I get a stock 1fz tank set up and try and bolt that in or put an intank fuel pump into the tanks I already have?
Cheers for any info!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Going from Diesel To EFI petrol Fuel pump set ups
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Going from Diesel To EFI petrol Fuel pump set ups
More Suzuki parts going to the big Suzuki Heaven in the sky!
You can feed the EFI pump from a Holley or Carter carby pump, a swirl pot isn't totally necessary but it is worth putting the lift pump close to the tank. The LS1 if stock needs to be set up with an atmospheric vented fuel pressure regulator, otherwise you will need to reset the injector flow rates in software. Standard fuel pressure is 4 bar. You will need to get into the ECU for anti-theft and if not running a speed sensor I do some mods to the IAC setting to ensure the car dosen't stall while slowing to a stop or while putting it into gear if it is an auto, there are also some reasonable performance gains from tuning, particularly in low to mid torque.
Joel
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
So I will need a fuel regulator aswell as I can't get a high pressure pump at the right pressure? Also I'm running the standard 5speed manual in the cruiser and didn't opt for the speed sensor from marks. How hard is it to modify the computer to get rid of the speed sensor stuff or do I need too with the manual?
More Suzuki parts going to the big Suzuki Heaven in the sky!
Fuel pressure is regulated by a regulator. The pumps always provide higher pressure than necessary, and the regulator works by trimming that down. I have never heard of an EFI system where the pump alone regulates the pressure; I think it would be too hard to build a pump that was always right.Kitika wrote:So I will need a fuel regulator aswell as I can't get a high pressure pump at the right pressure?
This is not legal advice.
this is the way i do all my external set ups on zooks. you will need a bigger surge tank for you're motor. i put the high pressure filter behind the hp pump just in case something goes wrong with the reg and the surge tank gets more pressure than it should.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
I would suggest you mount the efi pump at the bottom or lower than the surge tank unlike the drawing as it is using gravity to feed it, they have poor suction hence the need for a lift pump.
Joel
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Who is online
Users browsing this forum: No registered users and 4 guests