Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Engineers any one ????????

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 15
Joined: Thu Dec 04, 2008 8:35 pm
Location: Sunshine coast

Engineers any one ????????

Post by custom built »

Hay guys we are in a bit of a pickle. Got a nissan patrol gq wagon has 5 link font end, laminated diff housings etc etc. Need an engineers report or mod plate for all of the mods underneath. Does any one now of a dodgy road worthy guy or some that can give an engineers report so we can get this thing on the road?

we are on the sunny coast in Qld
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

yeah that's a good idea, ask for a dodgy report because that will hold up when you get pulled over.

Can your mods be legally done in QLD? If so why not actually get it all properly done via proper engineer?
Ransom note = demand + collage
Top
Posts: 179
Joined: Wed Jul 28, 2004 5:17 pm
Location: earth

aarrggg

Post by stormpatrol »

this post really needs attention MODS , MODS , / YOU CANT BE FOR REAL :bad-words: :bad-words:
THE SMOKER YOU DRINK THE DANCER YOU GET
Top
Posts: 172
Joined: Thu Nov 25, 2004 11:21 am
Location: Gold Coast

Post by Mick G »

You muppet :roll:
Top
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

isnt the guy that works for h :!: :!: :!: erland 4x4 wreckers bodgey for engieering ?


He had NFI when i spoke to him

:D
xxxx wrote:
:bad-words: :snipersmile:
Top
Posts: 144
Joined: Thu Feb 10, 2005 11:17 pm
Location: Gold Coast QLD

Post by V8 Rangie »

1 goose :roll:
1994 Range Rover Soft Dash, Rear ARB Locker, 33's, 2" body & Spring, custom bits
2004 Range Rover Diesel 20" wheels. My Black Beauty:-)
Top
Posts: 101
Joined: Mon Dec 04, 2006 10:49 pm
Location: Gold Coast

Post by Petes »

Put up some pics of the work
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Re: Engineers any one ????????

Post by GRIMACE »

custom built wrote:Hay guys we are in a bit of a pickle. Got a nissan patrol gq wagon has 5 link font end, laminated diff housings etc etc. Need an engineers report or mod plate for all of the mods underneath. Does any one now of a dodgy road worthy guy or some that can give an engineers report so we can get this thing on the road?

we are on the sunny coast in Qld
Send a PM to Barnsey on this board, I am sure he can help you out ;)
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Re: Engineers any one ????????

Post by Reddo »

GRIMACE wrote:
custom built wrote:Hay guys we are in a bit of a pickle. Got a nissan patrol gq wagon has 5 link font end, laminated diff housings etc etc. Need an engineers report or mod plate for all of the mods underneath. Does any one now of a dodgy road worthy guy or some that can give an engineers report so we can get this thing on the road?

we are on the sunny coast in Qld
Send a PM to Barnsey on this board, I am sure he can help you out ;)
I totally forgot about Barnsey.

I'd defently give him pm, he should be able to help you out.
Nice gq swb ute chop with a huffer for the good times
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

mate if you want a dodgy engineering report thats what i specialise.for you sir, $300 and will do a report on the mods listed above.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

DIRTY ROCK STAR wrote:mate if you want a dodgy engineering report thats what i specialise.for you sir, $300 and will do a report on the mods listed above.
Thats a bit steep mate. Fair dinkum!

Last time Barnsey only charged $180
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

X3 on sending a PM to Barnsey.

He is the shit when it comes to dodgy stuff.
Top
Posts: 2732
Joined: Fri May 28, 2004 11:50 pm
Location: Perth, WA

Post by stuee »

Micka wrote:X3 on sending a PM to Barnsey.

He is the shit when it comes to dodgy stuff.
You remember that boat he had? Dodgy indeed
-Scott- wrote:Isn't it a bit early in the day to be pissed? :finger:
Top
Posts: 355
Joined: Fri Jan 09, 2009 2:17 pm
Location: Maitland, where the best are built

Post by 31zook »

get in before it gets locked :D :lol:
This is where it's at...
http://auszookers.com/index.php

[url=http://auszookers.com/index.php?name=Forums&file=viewtopic&t=5220]The Big Dumb LWB[/url]
Top
Posts: 220
Joined: Wed Jul 15, 2009 3:15 pm
Location: Australia

mmm

Post by SteelArt »

The guy you want to talk to is Roy Linstrum can't find his mobile, I wrote it down somewhere, his work number is (07) 3253 4851. From what I have been told if you just give him your engine number, chassis number and drivers license he will take care of it for you and send out the appropriate paperwork.

Let us know how you get on as other may want to use him as well.
Top
Posts: 1067
Joined: Mon Nov 29, 2004 12:24 pm
Location: sydney

Post by hienuf »

People this is a serious question, help the guy out.

Mate just p.m 8UFF35T he does work for 4wd action and ARB. He also does some work for Repco, Engineering fridges.

This bloke can pass anything for you at the right price.
PATROL 2007 ST-L 4.8
3inch Lift, 35inch mtz, Rockhoppers
"POWER DEMANDS RESPECT"
Top
Posts: 1039
Joined: Mon Mar 05, 2007 10:28 am
Location: On board the Mothership

Post by Harb »

I know this bloke will do them........

http://www.directory.nsw.gov.au/showmin ... C15DEF4%7D
Harb

http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

http://www.mothfukleengineering.com.au/

Nice :rofl:
I am Tim
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Barnsey wrote:See my sig line.

I can pass anything............... with in rea$on. ;) ;) ;) ;)
Sorry for the hijack but do you guys stock Stuppedy Suspension products?

I also want to find out about one of your piggyback ECUs, will one of these give me better better engine manangment and what sort of $$$$$ am I looking at?
This is not legal advice.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

chimpboy wrote:
Barnsey wrote:See my sig line.

I can pass anything............... with in rea$on. ;) ;) ;) ;)
Sorry for the hijack but do you guys stock Stuppedy Suspension products?

I also want to find out about one of your piggyback ECUs, will one of these give me better better engine manangment and what sort of $$$$$ am I looking at?
I have one of barnseys piggy back ecus on my rover V8. I gaine about 40% more hp through out the rev range. Now producing well over 780hp at the fly.

Your results may vary but I am extremely happy with mine!

p.s. I have no idea about the Stuppedy suspension products thou, give him a ring, I am sure he will be glad to help out, I'll pm you his private number.
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

GRIMACE wrote:Now producing well over 780hp at the fly.
Awesome, is that with your fly still done up or with your fly undone?
This is not legal advice.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

chimpboy wrote:
GRIMACE wrote:Now producing well over 780hp at the fly.
Awesome, is that with your fly still done up or with your fly undone?
Undone!

Done up, I would guestimate Xtreme power losses.
Top
Posts: 179
Joined: Wed Jul 28, 2004 5:17 pm
Location: earth

cf

Post by stormpatrol »

HA HA cunny funts/ VSI ENGINEERING LOL :armsup: :bad-words: :bad-words:
THE SMOKER YOU DRINK THE DANCER YOU GET
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Re: mmm

Post by chimpboy »

SteelArt wrote:The guy you want to talk to is Roy Linstrum can't find his mobile, I wrote it down somewhere, his work number is (07) 3253 4851. From what I have been told if you just give him your engine number, chassis number and drivers license he will take care of it for you and send out the appropriate paperwork.

Let us know how you get on as other may want to use him as well.
Jokes aside I have heard this guy is pretty good to deal with. If it's your own vehicle and the cert is so you can drive it as opposed to selling it then he's fairly relaxed and most vehicles will pass. I would give him a call and run the situation by him.
This is not legal advice.
Top
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

Barnsey, do you have the 100 series caviar dispensers in stock? I need something to go with the chardy...
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 138 guests