Page 1 of 1
Engineers any one ????????
Posted: Thu Oct 01, 2009 5:17 pm
by custom built
Hay guys we are in a bit of a pickle. Got a nissan patrol gq wagon has 5 link font end, laminated diff housings etc etc. Need an engineers report or mod plate for all of the mods underneath. Does any one now of a dodgy road worthy guy or some that can give an engineers report so we can get this thing on the road?
we are on the sunny coast in Qld
Posted: Thu Oct 01, 2009 5:52 pm
by grimbo
yeah that's a good idea, ask for a dodgy report because that will hold up when you get pulled over.
Can your mods be legally done in QLD? If so why not actually get it all properly done via proper engineer?
aarrggg
Posted: Thu Oct 01, 2009 7:42 pm
by stormpatrol
this post really needs attention MODS , MODS , / YOU CANT BE FOR REAL
Posted: Fri Oct 02, 2009 11:19 am
by Mick G
You muppet
Posted: Fri Oct 02, 2009 11:27 am
by Ice
isnt the guy that works for h
erland 4x4 wreckers bodgey for engieering ?
He had NFI when i spoke to him
Posted: Fri Oct 02, 2009 11:38 am
by V8 Rangie
1 goose
Posted: Fri Oct 02, 2009 11:48 am
by Petes
Put up some pics of the work
Re: Engineers any one ????????
Posted: Fri Oct 02, 2009 1:03 pm
by GRIMACE
custom built wrote:Hay guys we are in a bit of a pickle. Got a nissan patrol gq wagon has 5 link font end, laminated diff housings etc etc. Need an engineers report or mod plate for all of the mods underneath. Does any one now of a dodgy road worthy guy or some that can give an engineers report so we can get this thing on the road?
we are on the sunny coast in Qld
Send a PM to Barnsey on this board, I am sure he can help you out
Re: Engineers any one ????????
Posted: Fri Oct 02, 2009 1:12 pm
by Reddo
GRIMACE wrote:custom built wrote:Hay guys we are in a bit of a pickle. Got a nissan patrol gq wagon has 5 link font end, laminated diff housings etc etc. Need an engineers report or mod plate for all of the mods underneath. Does any one now of a dodgy road worthy guy or some that can give an engineers report so we can get this thing on the road?
we are on the sunny coast in Qld
Send a PM to Barnsey on this board, I am sure he can help you out
I totally forgot about Barnsey.
I'd defently give him pm, he should be able to help you out.
Posted: Fri Oct 02, 2009 2:26 pm
by DIRTY ROCK STAR
mate if you want a dodgy engineering report thats what i specialise.for you sir, $300 and will do a report on the mods listed above.
Posted: Fri Oct 02, 2009 2:37 pm
by GRIMACE
DIRTY ROCK STAR wrote:mate if you want a dodgy engineering report thats what i specialise.for you sir, $300 and will do a report on the mods listed above.
Thats a bit steep mate. Fair dinkum!
Last time Barnsey only charged $180
Posted: Fri Oct 02, 2009 4:05 pm
by Micka
X3 on sending a PM to Barnsey.
He is the shit when it comes to dodgy stuff.
Posted: Fri Oct 02, 2009 5:04 pm
by stuee
Micka wrote:X3 on sending a PM to Barnsey.
He is the shit when it comes to dodgy stuff.
You remember that boat he had? Dodgy indeed
Posted: Fri Oct 02, 2009 5:05 pm
by 31zook
get in before it gets locked
mmm
Posted: Fri Oct 02, 2009 9:52 pm
by SteelArt
The guy you want to talk to is Roy Linstrum can't find his mobile, I wrote it down somewhere, his work number is (07) 3253 4851. From what I have been told if you just give him your engine number, chassis number and drivers license he will take care of it for you and send out the appropriate paperwork.
Let us know how you get on as other may want to use him as well.
Posted: Fri Oct 02, 2009 10:27 pm
by hienuf
People this is a serious question, help the guy out.
Mate just p.m 8UFF35T he does work for 4wd action and ARB. He also does some work for Repco, Engineering fridges.
This bloke can pass anything for you at the right price.
Posted: Fri Oct 02, 2009 10:36 pm
by Harb
Posted: Sat Oct 03, 2009 1:30 am
by BlueSuzy
Posted: Sat Oct 03, 2009 3:42 am
by chimpboy
Sorry for the hijack but do you guys stock Stuppedy Suspension products?
I also want to find out about one of your piggyback ECUs, will one of these give me better better engine manangment and what sort of $$$$$ am I looking at?
Posted: Sat Oct 03, 2009 5:47 am
by GRIMACE
chimpboy wrote:
Sorry for the hijack but do you guys stock Stuppedy Suspension products?
I also want to find out about one of your piggyback ECUs, will one of these give me better better engine manangment and what sort of $$$$$ am I looking at?
I have one of barnseys piggy back ecus on my rover V8. I gaine about 40% more hp through out the rev range. Now producing well over 780hp at the fly.
Your results may vary but I am extremely happy with mine!
p.s. I have no idea about the Stuppedy suspension products thou, give him a ring, I am sure he will be glad to help out, I'll pm you his private number.
Posted: Sat Oct 03, 2009 6:04 am
by chimpboy
GRIMACE wrote:Now producing well over 780hp at the fly.
Awesome, is that with your fly still done up or with your fly undone?
Posted: Sat Oct 03, 2009 6:09 am
by GRIMACE
chimpboy wrote:GRIMACE wrote:Now producing well over 780hp at the fly.
Awesome, is that with your fly still done up or with your fly undone?
Undone!
Done up, I would guestimate
Xtreme power losses.
cf
Posted: Sat Oct 03, 2009 8:00 am
by stormpatrol
Re: mmm
Posted: Sat Oct 03, 2009 8:15 am
by chimpboy
SteelArt wrote:The guy you want to talk to is Roy Linstrum can't find his mobile, I wrote it down somewhere, his work number is (07) 3253 4851. From what I have been told if you just give him your engine number, chassis number and drivers license he will take care of it for you and send out the appropriate paperwork.
Let us know how you get on as other may want to use him as well.
Jokes aside I have heard this guy is pretty good to deal with. If it's your own vehicle and the cert is so you can drive it as opposed to selling it then he's fairly relaxed and most vehicles will pass. I would give him a call and run the situation by him.
Posted: Sat Oct 03, 2009 9:20 am
by lump_a_charcoal
Barnsey, do you have the 100 series caviar dispensers in stock? I need something to go with the chardy...
