Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ diff in 80

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 363
Joined: Mon Feb 14, 2005 9:09 pm
Location: melbourne

GQ diff in 80

Post by duck »

i hurd some were that some one made arms that had a dog leg in them so that a GQ housing will fit into an 80 series, my understanding is that the spring hats needed changing coss 80 series have smaller springs, and that the panhard mount might have needed changing but you didnt have to weld on new arm mounts.

i have looked on the net but cant find anything

dose any one know anything about this, if not can some one make some lol
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

The only one I know of is Paulos that Sandy did the conversion on.
:rofl: :popcorn: :snipersmile:
Posts: 536
Joined: Mon Apr 18, 2005 2:59 pm
Location: sydney

Post by micka1 »

pretty sure 2dextreme do those arms . he has a web page and is on here too .
Posts: 363
Joined: Mon Feb 14, 2005 9:09 pm
Location: melbourne

Post by duck »

LOCKEE wrote:The only one I know of is Paulos that Sandy did the conversion on.
yer paulos is full custom things, was more looking at doing it meself, can weld on coil hats but wouldnt be confedent welding on arm mounts
Posts: 363
Joined: Mon Feb 14, 2005 9:09 pm
Location: melbourne

Post by duck »

micka1 wrote:pretty sure 2dextreme do those arms . he has a web page and is on here too .
yer just checked the web site and it dosnt list anything about them, will see if he writes up in here soon or ill shoot him an email, cheers
Posts: 220
Joined: Wed Jul 15, 2009 3:15 pm
Location: Australia

Post by SteelArt »

duck wrote:
micka1 wrote:pretty sure 2dextreme do those arms . he has a web page and is on here too .
yer just checked the web site and it dosnt list anything about them, will see if he writes up in here soon or ill shoot him an email, cheers
I was down there two weeks ago and there was an 80 series their which had a GQ diff in the front fitted with a set of Dale's custom arms so I am certain that he does them.

I would just give Dale a call as he doesn't spend much time on here.
Posts: 363
Joined: Mon Feb 14, 2005 9:09 pm
Location: melbourne

Post by duck »

SteelArt wrote:
duck wrote:
micka1 wrote:pretty sure 2dextreme do those arms . he has a web page and is on here too .
yer just checked the web site and it dosnt list anything about them, will see if he writes up in here soon or ill shoot him an email, cheers
I was down there two weeks ago and there was an 80 series their which had a GQ diff in the front fitted with a set of Dale's custom arms so I am certain that he does them.

I would just give Dale a call as he doesn't spend much time on here.
sweet as guys ill get onto it
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Post by +dj_hansen+ »

Or get onto 80UTE and get a Wally front housing made up...

GQ centre/pumpkin with 80 everything IIRC. That way you keep the spring/arm mounts, brakes, CV's etc.
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Posts: 363
Joined: Mon Feb 14, 2005 9:09 pm
Location: melbourne

Post by duck »

+dj_hansen+ wrote:Or get onto 80UTE and get a Wally front housing made up...

GQ centre/pumpkin with 80 everything IIRC. That way you keep the spring/arm mounts, brakes, CV's etc.
i dont have a million dollers lol


i think there about 4 grand and you need to give him an 80 housing, 80 series CVs axels ect, a GQ housing and diff, all i would be able to sell out of it would be an 80 center with a locker.

going this way i can sell a breaced 80 series housing compleat with locker and 4 extra CVs
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

why are you looking at changing? 80 front diffs can be built stronger than GQ...
Spit my last breath
Posts: 363
Joined: Mon Feb 14, 2005 9:09 pm
Location: melbourne

Post by duck »

bad_religion_au wrote:why are you looking at changing? 80 front diffs can be built stronger than GQ...
every thing can be build stronger.....i wouldnt know were to start and cant rebuild diffs but can stick housings under cars and rebuild housings
Posts: 1676
Joined: Tue Oct 22, 2002 9:26 am
Location: brisbane

Post by 1MadEngineer »

bad_religion_au wrote:why are you looking at changing? 80 front diffs can be built stronger than GQ...
shhh don't tell him that.
Nissans are the best- I read it on the interweb so it must be true :roll:
WWW.TEAMDGR.COM
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

duck wrote:
bad_religion_au wrote:why are you looking at changing? 80 front diffs can be built stronger than GQ...
every thing can be build stronger.....i wouldnt know were to start and cant rebuild diffs but can stick housings under cars and rebuild housings
if you can remove your centre and axles, you can get somewhere else to build a tuff 80 centre for you...

then you can throw some Chromo-longfields in when you put it back together?
Spit my last breath
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Post by +dj_hansen+ »

duck wrote:
bad_religion_au wrote:why are you looking at changing? 80 front diffs can be built stronger than GQ...
every thing can be build stronger.....i wouldnt know were to start and cant rebuild diffs but can stick housings under cars and rebuild housings
You would probably find getting the centre setup 'correctly' would cost less than slotting in a GQ front housing, when you inc rebuilding the GQ housing, welding spring hats, locker etc.

There are a handfull of threads on 80 front strength, and allot of good info here especially.

http://www.outerlimits4x4.com/ftopic132338-0-asc-0.php
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Posts: 79
Joined: Tue Jun 19, 2007 9:52 pm
Location: Darwin

Post by 4runnernomore »

Here is a pic of my 80 running GU diffs and 2Dextreme arms.

Image

Bought it like this so I can't tell you the costs involved.

Cheers, Chris
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

the coils do look overly impressed..

im gathering that the patrol coil mounts are out further?
Posts: 363
Joined: Mon Feb 14, 2005 9:09 pm
Location: melbourne

Post by duck »

crankycruiser wrote:the coils do look overly impressed..

im gathering that the patrol coil mounts are out further?
i think its actually flexing a lil ray, the coil hats are in roughly the same spot but you gotta weld on new hats any way as the GU/GQ coils are different diamaters so there is no reason why you would fuck that up
Posts: 243
Joined: Thu Jul 15, 2004 9:21 am
Location: Townsville

Post by Dane »

1MadEngineer wrote:
bad_religion_au wrote:why are you looking at changing? 80 front diffs can be built stronger than GQ...
shhh don't tell him that.
Nissans are the best- I read it on the interweb so it must be true :roll:
How about you guys in the know write up a step by step tech thread on how to set up the 80 front diff properly? I know there'd be heaps of people on here with the skills to do the work if they were shown what is required and how to do it. Or post a link if there is a thread elsewhere?
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

Dane wrote:
1MadEngineer wrote:
bad_religion_au wrote:why are you looking at changing? 80 front diffs can be built stronger than GQ...
shhh don't tell him that.
Nissans are the best- I read it on the interweb so it must be true :roll:
How about you guys in the know write up a step by step tech thread on how to set up the 80 front diff properly? I know there'd be heaps of people on here with the skills to do the work if they were shown what is required and how to do it. Or post a link if there is a thread elsewhere?
Apart from the front diff center, i'd rather go the 80 front any day.

longfield super set
longfield hub gears
better bushes arrangement than nissan
good availability of gears and ratios from the states
truss it up and be aware of giving it poo in reverse, and voila' a pretty decent front end.
and a lot less faffing around
http://www.populationparty.org.au/
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest