Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1hz kicks when i let out clutch or push the accelerator

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2
Joined: Thu Oct 08, 2009 4:07 pm
Location: Sydney

1hz kicks when i let out clutch or push the accelerator

Post by mudeater »

Hi
Im new to this forum but i have a landcruiser 1hz and goes great except for whenever you change gears quickly or push the accelerator down quickly the car kicks like jumps in a way ive had the front diff replaced so im thinking its the rear diff that has gone?
anyone have any ideas

Thanks!
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Is this a Full Time 4WD 80 series?
Top
Posts: 128
Joined: Mon Oct 23, 2006 5:29 pm
Location: Melbourne

Post by rezpkt »

Some more info on your vehicle would help...

I'm tipping you have a GXL and full time 4WD? If it's pre 1993 you may want to upgrade to post 94 CV and flanges. Also consider a part time kit.

"Sloppy driveline conversion"
LINK

Otherwise remove front and rear control arms and inspect bushes.
Team: Cause For Concern
http://www.offroad80s.com
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

Engine mount?
Top
Posts: 2
Joined: Thu Oct 08, 2009 4:07 pm
Location: Sydney

Post by mudeater »

Its a 100 series 1999 model. You don't think it could be caused by the rear diff starting to go?
Top
Posts: 9
Joined: Thu Aug 27, 2009 9:49 pm
Location: sunny coast

kkk

Post by mud_runner123 »

wat did u find out that it was?
Top
Posts: 2
Joined: Wed Dec 17, 2008 4:18 pm
Location: Cherrybrook

Post by Robslandcruiser »

not as yet still trying to find a solution spoke to someone that thought it may be the injectors..
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 10 guests