Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
swb max seating capacity?
Moderator: Micka
swb max seating capacity?
how many people can a swb landy legaly have? i seen one on ebay with 1 sideways seat in the rear that seats 2 does this mean u could put another one on the other side and have 4 in the back plus 3 in the front?
Goon and Juice
7 seater was the maximum factory option for a series SWB.
3 across the front. 2x 2-seat side facing in rear.
The genuine 7-seat wagons came with sliding windows in the rear and a tropical roof. They are rare in OZ, but were sold.
3 across the front. 2x 2-seat side facing in rear.
The genuine 7-seat wagons came with sliding windows in the rear and a tropical roof. They are rare in OZ, but were sold.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Rear seats were always an option on swbs that were not station wagons. The requirement for seatbelts depends on the ADR type rules at the time the vehicle was first registered.
If your rego documentation (or previous documentation) does not list a seating capacity then you could simply put in the rear seats and no engineering is required. No seatbelts for 50s/60s versions either - not sure about later models as depends on ADRs.
If the documents only list the chassis number as a 3 seater than most likely engineering will be required with its associated red tape.
My 57 swb 88 station wagon always had rear seats as standard so will not be an issue when it gets back on the road.
Garry
If your rego documentation (or previous documentation) does not list a seating capacity then you could simply put in the rear seats and no engineering is required. No seatbelts for 50s/60s versions either - not sure about later models as depends on ADRs.
If the documents only list the chassis number as a 3 seater than most likely engineering will be required with its associated red tape.
My 57 swb 88 station wagon always had rear seats as standard so will not be an issue when it gets back on the road.
Garry
Garry
Who is online
Users browsing this forum: No registered users and 46 guests