Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Mag Blanks

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 54
Joined: Sat Dec 15, 2007 10:15 am
Location: Central Qld

Mag Blanks

Post by ANIMAL »

Is it possible to get blanks for mags and drill your own centers??
Looking at Dick Cepeks DC1 polished from states.Need to get them drilled
to suit new Cruiser Ute stud pattern.As they don't do that stud pattern!
What are your thoughts??
VRT...Viagra Racing Team - Just goes hard !
Lowmead 3 car challenge entrant 2011.
Gq extra cab.
12/2006 GU td6 Tourer.
Posts: 1315
Joined: Wed Aug 17, 2005 6:24 pm
Location: Spring Mountain, Greenbank.

Post by brooksy »

Give Ryano at Fourbys a call. If the stud PCD isn't a great difference he can get the rims re-drilled & steel lug collar inserts placed in the rims. Not sure if the DC1's don't already have the steel insert as MT rims usually do.




brooksy
C44F-Custom 4x4 Fabrications
0400 443 802
brooksy72@live.com.au
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

I thought it was illegal to modify rims like that.

Otherwise, getting the second hole drilled for inner air bead locks would also be allowed.
Posts: 960
Joined: Mon Feb 23, 2004 10:57 am

Post by Ryano »

If it's done by an approved rim repairer it's legal. Biggest thing is that there has to be enough meat in the boss of the rim to handle the redrill and inserts.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests