Page 1 of 1
Mag Blanks
Posted: Sun Oct 11, 2009 6:59 am
by ANIMAL
Is it possible to get blanks for mags and drill your own centers??
Looking at Dick Cepeks DC1 polished from states.Need to get them drilled
to suit new Cruiser Ute stud pattern.As they don't do that stud pattern!
What are your thoughts??
Posted: Sun Oct 11, 2009 7:11 am
by brooksy
Give Ryano at Fourbys a call. If the stud PCD isn't a great difference he can get the rims re-drilled & steel lug collar inserts placed in the rims. Not sure if the DC1's don't already have the steel insert as MT rims usually do.
brooksy
Posted: Sun Oct 11, 2009 8:06 am
by Chucky
I thought it was illegal to modify rims like that.
Otherwise, getting the second hole drilled for inner air bead locks would also be allowed.
Posted: Sun Oct 11, 2009 1:57 pm
by Ryano
If it's done by an approved rim repairer it's legal. Biggest thing is that there has to be enough meat in the boss of the rim to handle the redrill and inserts.