Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

KAM Locker

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

KAM Locker

Post by ISUZUROVER »

Out of interest, any zook guys running this locker?

http://www.izook.com/tech/samurai/drive ... er/kam.htm

If so, any feedback?
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: KAM Locker

Post by Guy »

ISUZUROVER wrote:Out of interest, any zook guys running this locker?

http://www.izook.com/tech/samurai/drive ... er/kam.htm

If so, any feedback?
Looks like a huge amount of work to install .. as well as custom axles .. don't think that I would be terribly interested over and airlocker...
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 166
Joined: Mon Dec 27, 2004 10:21 pm
Location: BrisBane Queensland Au

Post by tanshi »

ask gutless on here he has one. a heap of work to fit.
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

They are an awesome locker, but for all the effort involved in fitting one, its much easier to just get an airlocker. The only reason I bought one was cos I am running a rear LSD in front diff with Chromo 26 splines, and wanted heavy duty chromo rears to match. The Kam locker comes with these as part of the kit, so 2 birds with one stone.

Like I said, they are a bitch to fit, and there is alot of welding involved, so you have to be very careful not to warp your housing.

Pete
[url]www.twinstickoffroad.com[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 51 guests