Page 1 of 1
setting 4 adj upper & lower control arms on SWB??
Posted: Thu Oct 15, 2009 5:07 pm
by nedla
I just bought adj upper & lower control arms from snake racing. very happy with them being so easy to fit and adj. bought them for the tailshaft vibrations, just wanna no if there is a specific setting for them?? I have 5" +2" lift..
Posted: Thu Oct 15, 2009 5:24 pm
by SIM79
Posted: Thu Oct 15, 2009 6:17 pm
by waandy
are you running double cardinal or stock shaft?
Posted: Thu Oct 15, 2009 6:48 pm
by nedla
just a stockie was thinking bout DC joint
Posted: Thu Oct 15, 2009 6:54 pm
by waandy
u will have some serious uni angle with stock shaft, and rotating the diff back to suit a dc will be a big turn, why is ur rig so high? what size tyres are you running? 7 inch is a huge lift in a swb
Posted: Thu Oct 15, 2009 6:59 pm
by nedla
it was the first thing i bought for the car. got it second hand off a mate bout two years ago. I run 31s for the road(i know thats half the problem) and 35 pedes
Posted: Thu Oct 15, 2009 7:42 pm
by nedla
ive already got gear box spacers in that made it a bit better but still pretty loud. shits me up the wall
Posted: Thu Oct 15, 2009 8:41 pm
by waandy
basically you have to point the pinion angle down so that the flanges are running parralal, id lengthen the lowers 16mm at first and see what it does, every set up is different so you will have to fine tune it
Posted: Sat Oct 17, 2009 3:27 pm
by nedla
thanks just did it yesterday i reset them then made them longer no more noises
thaks guys