Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU rear calipers

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 35
Joined: Fri Dec 14, 2007 9:44 pm
Location: Kellyville

GU rear calipers

Post by DA22LE »

Hi,

Can anyone tell me if the GU rear calipers are a bolt on to GQ/ Maverick.

I have upgraded the fronts and i need to fix rears as the pin that locates them is a bit worn. Do GU's have a slightly larger rear disc??

Cheers

:cool: Daz :cool:
Top
Posts: 443
Joined: Tue Jan 04, 2005 10:08 pm
Location: sydney

Post by mattsluxtruck »

What setup are you running on the front now Daz?
Some better braking on my one would be good!
Top
Posts: 35
Joined: Fri Dec 14, 2007 9:44 pm
Location: Kellyville

Post by DA22LE »

Hey,

I have GQ EFI twin pots, and slotted rotors. Yes they fit with 15 inch wheels......

Cheers

:cool: Daz :cool:
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

DA22LE wrote:Hey,

I have GQ EFI twin pots, and slotted rotors. Yes they fit with 15 inch wheels......

Cheers

:cool: Daz :cool:
what sort of coin did you shell out for the setup. AM intrested in doing the same. Did you have to upgrade the master cyl as well?

Cheers
Top
Posts: 1918
Joined: Fri Aug 26, 2005 4:28 pm
Location: Melbourne

Re: GU rear calipers

Post by GUtripper »

DA22LE wrote:Hi,

Can anyone tell me if the GU rear calipers are a bolt on to GQ/ Maverick.

I have upgraded the fronts and i need to fix rears as the pin that locates them is a bit worn. Do GU's have a slightly larger rear disc??

Cheers

:cool: Daz :cool:
I have a feeling that on GU's, the front rotors are 300mm and the rears are 305mm, although the fronts are thicker. I think.... I'm sure i've read that somewhere.

Was just looking for brake pins for a GQ rear, and was told by a brake place that GU and GQ pins and sleeves are not interchangable...

Get on the Pootrol forum and PM gary / Nizzbits, he'll check part numbers and interchangability.
Top
Posts: 64
Joined: Sun Aug 26, 2007 4:49 pm
Location: perth W.A

Post by MUNGA GQ »

I have a GQ 94 efi . I have one standard twin piston on the back and one gu single as well , fits and works.

But i am looking for a standard twin to put back on. right hand side i think.
RIGHT FOOT FOR GO!!!
Top
Posts: 35
Joined: Fri Dec 14, 2007 9:44 pm
Location: Kellyville

Post by DA22LE »

pongo wrote:
DA22LE wrote:Hey,

I have GQ EFI twin pots, and slotted rotors. Yes they fit with 15 inch wheels......

Cheers

:cool: Daz :cool:
what sort of coin did you shell out for the setup. AM intrested in doing the same. Did you have to upgrade the master cyl as well?

Cheers
Sorry for the late reply. I picked up the calipers second hand for around the 170 mark i think. $100 for the seal kit each side roughly. Slotted rotors were about $100 each....Add labour on top of that, unless your doing it yourself......
Image
Dont have to do anything to master cyl'....

Cheers

:cool: Daz :cool:
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests