Outer Limits 4x4 Board

Posted: **Sun May 16, 2004 11:46 pm**

On the weekend.

Not much else to say really.

Posted: **Sun May 16, 2004 11:50 pm**

did you martack ? or did you Fu(k arount trying to get the inner circlips on

Posted: **Mon May 17, 2004 8:14 am**

You mean the circlip that holds the freewheel hub mechanism... ? They must be the most frustrating little mongrel part ever made.

Posted: **Mon May 17, 2004 9:08 am**

um no the circlip that goes on the end of the axle inside the cv to stop the axle sliding out of the cv

Posted: **Mon May 17, 2004 10:06 am**

ToNkA wrote:On the weekend.

Not much else to say really.

That's awesome.

Any pics?

Posted: **Mon May 17, 2004 3:23 pm**

but did you get one of these

Posted: **Mon May 17, 2004 4:44 pm**

spazbot wrote:did you martack ? or did you Fu(k arount trying to get the inner circlips on

If you run this clip with longs and break a inner axle off at the cv end of it then you will have fun trying to get the broken bit out :lol:

The fitting instructions say to do the tac weld on the axle and not to reuse the c clip

Posted: **Mon May 17, 2004 6:33 pm**

the new longs don`t have the ring welded so you can get the star out but still do the mar tac to save the 3 member

Posted: **Mon May 17, 2004 8:04 pm**

I martacked it and yes I got two stickers!

And the best bit is they only cost me $200 for the pair brand new!

Posted: **Mon May 17, 2004 8:10 pm**

ToNkA wrote:I martacked it and yes I got two stickers!

And the best bit is they only cost me $200 for the pair brand new!

Hows this work they cost more than this in US dollars?

Posted: **Mon May 17, 2004 8:42 pm**

maybe 200 ea tonka

NICK

Posted: **Mon May 17, 2004 9:23 pm**

Jesus! I miss type one number and the longfield police track you down! $300 Aus.

$120 each US dollars,

$240 for the pair US Dollars.

Exchnage rate was up at 80cents when I bought em, so it was a killer deal!

Posted: **Mon May 17, 2004 9:26 pm**

ToNkA wrote:Jesus! I miss type one number and the longfield police track you down! $300 Aus.

$120 each US dollars,

$240 for the pair US Dollars.

Exchnage rate was up at 80cents when I bought em, so it was a killer deal!

do we need to investigate this matter more?

:finger:

Posted: **Mon May 17, 2004 9:31 pm**

I love you nick.

Was I meant to fill em with grease?

Posted: **Mon May 17, 2004 9:35 pm**

nah, a bit of DE-HYRO will do the job.

Posted: **Mon May 17, 2004 9:39 pm**

I used WD-40

Posted: **Tue May 18, 2004 4:27 pm**

ToNkA wrote:Jesus! I miss type one number and the longfield police track you down! $300 Aus.

$120 each US dollars,

$240 for the pair US Dollars.

Exchnage rate was up at 80cents when I bought em, so it was a killer deal!

HA HA I paid $80ea US

Posted: **Tue May 18, 2004 5:45 pm**

4sum4 wrote:
ToNkA wrote:Jesus! I miss type one number and the longfield police track you down! $300 Aus.

$120 each US dollars,

$240 for the pair US Dollars.

Exchnage rate was up at 80cents when I bought em, so it was a killer deal!

HA HA I paid $80ea US

Did you also get a free trip to the USA to go skiing? :finger:

Posted: **Tue May 18, 2004 10:03 pm**

so y tac weld the axle into the cv????????

Posted: **Wed May 19, 2004 4:23 pm**

adrian wrote:so y tac weld the axle into the cv????????

Read from the start

Posted: **Thu May 20, 2004 9:54 pm**

What the stuff is a MARTAC?????????Please explain

Posted: **Thu May 20, 2004 10:03 pm**

martac is like bluetac but better

nah really its a small tack weld on the end of the axle so they dont slide into the center as there is nothing to home them into the cv