Page 1 of 1
R32 seat into 106 Hilux
Posted: Mon Oct 19, 2009 7:13 pm
by Lux_89
Hi,
Once again im at my hilux, scored some r32 skyline seats for it.. Ino the basics of fitting them, i just wanna know if anyones done it b4? havn got em yet so just wanna know easy hard or dont bother...
Cheers, Weavle
Posted: Tue Oct 20, 2009 8:04 am
by MR 1JZ
also interested in this as I want to put R32 GTR seats in my bundy
Posted: Tue Oct 20, 2009 8:23 am
by Rory
get the seats n bring em over, iv seen em in 2wd luxs b4 so i doubt they are to hard to put in
Posted: Tue Oct 20, 2009 11:41 am
by johnsy86
its not that difficult 3 out of the 4 bolt holes line up sweet on drivers side and 2 out of the 4 line up on passengers side and a nut and bolt is needed for the 3rd, they sit a lil lower than standard lux seats but u can wind the lumber support right up to sit even with lux seats, so if ur not to worried bout only having 3bolts hold the seat in on each side instead of 4 there a great seat to fit real supportive and u can pick them up reasonably cheap.
Posted: Tue Oct 20, 2009 3:23 pm
by Lux_89
Thanks guys... rory,pretty sure illbe over sooner or later to partake in drinkingpiss/workingoncar hahaa...
Hope this helps others...
Maybe wack it in the STICKY thread once ive got photo's...?
saets
Posted: Tue Oct 20, 2009 6:38 pm
by SHANE055
On mine the front mounts lined up perfectly just had to drill the holes out a little bigger
the rear outer mounts i just welded a bit of flat plate to them and ad to drill the hole back a little further and the ones against the transmission tunnel took a little fab work but i'm really happy with the seats there BS comfortable and keep you locked in nice and tight when wheeling.
Posted: Tue Oct 20, 2009 6:50 pm
by ferrit
Are you trying to do it Legally or not?