Page 1 of 1
33' Muddys on a standed hilux
Posted: Mon May 17, 2004 11:34 pm
by Terry_Toyota
i have an 85' hilux and i want to put 33' muddys on it, at the mowment it just has standed 31's on it and standed hight, i was thinking puting a 3' lift on it, would that be enuf to fit 33's ? or should i go anothor way to make my 4WD bigger? more lift? more power? :roll:
Posted: Tue May 18, 2004 10:32 am
by Walrus 4X4
i have an 85' hilux i have 2" body lift and 2" suspenion lift with 33" muddies and it seem to be alright :lol:
Posted: Tue May 18, 2004 10:59 am
by cplux
when i had a 3" lift i had to move the front axle forard on the spring perches to avoid tyres rubbing on body. I think it was moved about 30mm forward
tyres
Posted: Tue May 18, 2004 3:57 pm
by 40 lover
you will easily fit them with only a 2in lift
Posted: Tue May 18, 2004 5:39 pm
by De-lux
does anyone know if that would be the same for a dual cab 1993 lux?
(fitting 33"s with a 2" lift i mean)
Posted: Tue May 18, 2004 8:33 pm
by Macca177
yes i rekon u will be able to fit them. Just under full compression it may rub on the rear part of the front guard..thast where mine rub and ive got a 2"body lift and a suspion lift(3" i think)
but its ok just beat the seam down thats on the gurad to help stop the seam cutting the tyre! bit of rubbing is all good !
Posted: Tue May 18, 2004 9:11 pm
by Aza
33's would fit with 2 inch body lift without too many problems
Posted: Tue May 18, 2004 9:22 pm
by pj68
I've got a 92 dual cab with 2" suspension lift and my 235/85R16's (32" equivalent) rub the back of the inner guard under compression. Not a big deal just no paint on that part, it's also noisy when the plastic inner catches. The 33's might catch a bit more especially the extra width. Your standard gearing might struggle a bit as well.
Posted: Wed May 19, 2004 10:59 pm
by Terry_Toyota
2' of lift only sounds like its just enuf to fit them in, maybe i should lift it by 3' and do a 2' body lift, no rubing then right :roll: my friend rekons i should just go the extra mile and put 35's on, my car would be huge then but probly not legal :?
Posted: Thu May 20, 2004 10:26 pm
by Russell Coit
The Rollux has stock spring hight but it was necessary to fit a 2" body lift for clearance on up travel ( suspention lift will still alow too much up travel )
But The Mongrels proved their worth
Posted: Fri May 21, 2004 1:44 pm
by Bazz107
I had 33" tyres on the 4runner, Found that they rubbed really bad on the back of the front Guards, if that makes any sense, First time took out cut the crap out of brand new set of tyres, beated the seam flat and stopped from cutting my tyres so bad, that was with 2 Inch suspetion Lift, would go with 2 inch body as well.