Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Snorkle for an NL escape

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Snorkle for an NL escape

Post by Guy »

NL escape snorkle, I seem to get the airfilter we a bit on the paj, and the air path to it looks appaling.
Is it possible to fit a NH or NJ snorkle to it ?.

Safari do not list a snorkle for it, but from what I can see the guard and airbox look identicle ..

Can anyone help with confirm that one will fit .. happy to much about a bit to get it one there, so long as it doesnt look like a bodge job.

I like the plastic ones .. not really interested in a tube and elbow type.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 191
Joined: Sat Jan 18, 2003 6:23 pm
Location: melb

Contact:
Contact pickle

Post by pickle »

Pretty sure the NH /NJ will fit. Basically the Escape is the same as the earlier models with a few bits and peices and a 3.5.
Dave
Top
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

Don't the NL escapes have an extra "bulge" in the gaurd like the GLS? If so the NH-NK won't fit as the gaurds are flat. Will have a look at work tomorrow to see if airtec do one if you like.
Top
Posts: 12
Joined: Fri Aug 07, 2009 12:13 pm
Location: melbourne

Post by bigpaj »

yep airtek do one.

It's $495 from memory from your local TJM dealer.
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

hudson44 wrote:Don't the NL escapes have an extra "bulge" in the gaurd like the GLS? If so the NH-NK won't fit as the gaurds are flat. Will have a look at work tomorrow to see if airtec do one if you like.
Mine are very flat ... will get some pics to compare .. but if airtec make one that would be great.. I am a bolt on bandit these days ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: Snorkle for an NL escape

Post by Guy »

Ok so after recent floods and wet air filters .. I have decided to bit the bullet and go for it ..

BUT

I have heard that the 80 series crusier snorkle is also an option .. I am happy to do some modding .. to the inner workings if this is a better option as far as flow goes .. the crusier unit looks substantially larger cross section wise.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest