Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

front brakes shudder?? sierra wt

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 398
Joined: Wed Feb 06, 2008 12:52 pm
Location: Sunshine Coast

front brakes shudder?? sierra wt

Post by islandvitara »

my front brakes shudder under braking buh nothing is noticed when driving only happens when im braking...?

noticed this after an accidental "handstand" on the rear wheels on the beach yday (hit a sand dune step and the front end popped up in the air) came down with a big thud too...may have i bent something? brake rotor?
Top
Posts: 240
Joined: Sun May 13, 2007 9:05 pm
Location: Medowie

Re: front brakes shudder?? sierra wt

Post by ZUKPOWER »

islandvitara wrote:my front brakes shudder under braking buh nothing is noticed when driving only happens when im braking...?

noticed this after an accidental "handstand" on the rear wheels on the beach yday (hit a sand dune step and the front end popped up in the air) came down with a big thud too...may have i bent something? brake rotor?
shudder?
I know my front rotors are warped as when I apply pressure to the brakes the pedal 'pulsates' in and out
Top
Posts: 398
Joined: Wed Feb 06, 2008 12:52 pm
Location: Sunshine Coast

Post by islandvitara »

EXACTLY what im talkin bout bud :armsup: pulsates in and out..
Top
Posts: 240
Joined: Sun May 13, 2007 9:05 pm
Location: Medowie

Post by ZUKPOWER »

well yep sounds like fugged rotors to me lol pull them out and you should be able to see it by eye or with a straight edge
Top
Posts: 398
Joined: Wed Feb 06, 2008 12:52 pm
Location: Sunshine Coast

Post by islandvitara »

im assuming u cant fix em? just replace em? and how does this happen, im curious :D
just beat a Marlin in a swimming race
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Simple fix, remove wheels, unbolt caliper, get rotors machined, replace pads.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Posts: 398
Joined: Wed Feb 06, 2008 12:52 pm
Location: Sunshine Coast

Post by islandvitara »

thanks bud cheers!! :armsup:
just beat a Marlin in a swimming race
Top
Posts: 240
Joined: Sun May 13, 2007 9:05 pm
Location: Medowie

Post by ZUKPOWER »

AFAIK Rotors can only be machined so much (ie. they have to be a certain thickness) but the brake shop will be able to tell you whether they can be machined or not. I presume you could source new rotors from someone like Autopro or Supercrap etc
Top
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

Post by Turbo Tonka »

i replaced mine on my last sierra with a ebay set.$150 delived for new pads and rotors were very good.

My zuk now is also getting the slight pulsating through the pedal.So will have to check mine,they look to be in good nik tho and have a heap of pad left so hopefully a quick lick on the lathe will fix him up
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

If the pulsing is in the pedal, but not shaking the steering wheel, your rear drums may be out of round too. They can be machined as long as they are not at their maximum ID after machining.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 43 guests