Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

BJ70 Lift?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 52
Joined: Mon Jul 27, 2009 8:14 pm
Location: Rockhampton, QLD

BJ70 Lift?

Post by CruiserFun »

hey guys, nearly all the Bj70 i've seen have 2" suspension and 2" body. i was just wondering where do i go to get a 2" suspension lift? do everyday 4wd shops stock it? im not to sure as the Bj70 are a more rare vehicle. and wondering if the leaves off the 75 tray back fit the Bj70?

cheers, heath
Top
Posts: 304
Joined: Wed Oct 30, 2002 11:14 pm
Location: Brisbane

Contact:
Contact mlowe76

Post by mlowe76 »

Heath,

They should have the same rear springs as the following:

BJ73 BJ74 FJ70 FJ73 FJ74 1984-1993

The UTE rears have bigger bushes I believe - someone else may know 100%
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

70 series leaf springs are all the same, might need a little tweaking to suit your vehicle weight. Rears are the same as 60 series rears.

Heaps to choose from
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Top
Posts: 352
Joined: Sun Aug 30, 2009 1:00 pm
Location: Australia

Post by GO79 »

all the same length but diffrent amount of leafs in the packs to suit differnt model 7x series ie 75 series ute have more than shortys
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

75,76,77,78 and 79 rear springs are different, they are longer and wont fit.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Top
Posts: 52
Joined: Mon Jul 27, 2009 8:14 pm
Location: Rockhampton, QLD

Post by CruiserFun »

cheers fellas, yeh i already knew that the middys fit. but now im just wondering if i can go into a 4wd shop and ask for lift for a BJ70 would they stock them?? and wat are the best brands people are running?

cheers, heath
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests