I have a GU3, with the standard Nissan winch bar on the front and want to add a set of brush/side rails to it.
ARB and TJM have told me that their units don't fit due to the angle of the side support loop of the bullbar.
I have seen some vehicles which appear to have the full length brush rails and sliders connected to the factory winch bar. I am sure that I have seen TJM units connected to the factory bar, but can't find it anymore.
Has anyone done this, or is a custom job the only way I can get a set.
If so, can anyone point me in the right direction for a custom set of brush rails/sliders. I am out Central West NSW, so would need them sent out to me.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GU brush rails/sliders ??
I am looking at making up a set for myself as i didnt like the arb ones with the 2 bends around the guards. Just have to find the time to do it thou. 
2002 GU TD42T ST wagon. TMIC & 2012 Hilux scoop
4" Lift, 90 series koni's, King springs, 4H Drop boxes, seperior super flex arm, MM hydraulic winch,
315/75/16 Goodyear Kevlar MTR's.
4" Lift, 90 series koni's, King springs, 4H Drop boxes, seperior super flex arm, MM hydraulic winch,
315/75/16 Goodyear Kevlar MTR's.
Who is online
Users browsing this forum: No registered users and 0 guests