Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

New Cab, Now Wont start, Help Asap Please!!

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 15
Joined: Mon Sep 28, 2009 9:21 pm
Location: Melbourne

New Cab, Now Wont start, Help Asap Please!!

Post by Deneo »

Hey guys,

Put a new cab on my hilux 1986 LN65, The shell i got had the fusebox from the righthand kickpanel cut out, so i re ran that loom, All was fine put everything together until today when i tried to start it and it won't start, The car cranks over but won't fire.
The glow light and everything is fine and works i don't know if it's just saying it's pre-heated but yeah, It's getting fuel i think so i'm stumped.
The car started after i rolled it (After putting half the diesel oil on the roof of the garage haha) so the engine is fine i don't know what to look at next.
Any Help Would be greatly appreciated,
Thanks guys.
Deneo.
Top
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Post by Wozza244 »

Crack a cpl injectors and see if it is getting fuel.
You will prob have to bleed the filter and may even have to take all the glow plugs out and crank it over till ya see good atomised fuel coming out the glow plug holes mate.
Try that and see where you get.
Get out there!!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests