Page 1 of 1

New Cab, Now Wont start, Help Asap Please!!

Posted: Wed Nov 18, 2009 7:30 pm
by Deneo
Hey guys,

Put a new cab on my hilux 1986 LN65, The shell i got had the fusebox from the righthand kickpanel cut out, so i re ran that loom, All was fine put everything together until today when i tried to start it and it won't start, The car cranks over but won't fire.
The glow light and everything is fine and works i don't know if it's just saying it's pre-heated but yeah, It's getting fuel i think so i'm stumped.
The car started after i rolled it (After putting half the diesel oil on the roof of the garage haha) so the engine is fine i don't know what to look at next.
Any Help Would be greatly appreciated,
Thanks guys.
Deneo.

Posted: Wed Nov 18, 2009 9:03 pm
by Wozza244
Crack a cpl injectors and see if it is getting fuel.
You will prob have to bleed the filter and may even have to take all the glow plugs out and crank it over till ya see good atomised fuel coming out the glow plug holes mate.
Try that and see where you get.