Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

pajero going efi on my 2.6 NF

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 30
Joined: Mon Jan 21, 2008 8:25 pm
Location: PERTH

pajero going efi on my 2.6 NF

Post by wildmouse »

HI all , got a 2.5 td want to convert to a petrol efi.
so far I have a sigma recond short motor.
Was looking at magna injection, but cant find any manual gearbox ones,is it ok to use an auto donor vehicle, I have the flywheel and clutch ass.
Also I was looking at RPWs stage 2 cam,bearing in mind that later on I may turbo it.
At the moment I am still collecting any bits I can find,but they are getting rare
Will ther be any other issues that I havent mentioned,will I need to change fuel lines or tank to suit petrol ,or should I swap whole car for petrol one. would be a pity as mine does not look much but it is mechanically very good. any help appreciated
thanks
Posts: 212
Joined: Sun Apr 19, 2009 8:40 am
Location: Branxton

Post by phat-customs »

www.sigma-galant.com

Heaps of info here!!!
The Box-Kite Paj: Gone...
Now: 96 TDI Disco, 2" Lift, 265's and a leaky windscreen...
Posts: 30
Joined: Mon Jan 21, 2008 8:25 pm
Location: PERTH

Post by wildmouse »

Thanks for the reply, have done research on that site, but these questions wernt at answered, I will do more research.
In the mean time I just bought all the magna efi stuff, and arebuilt 2.6 with a broken balance shaft.
So now I need a turbo manifold and a balance shaft removal kit, cant find anyone selling them.
Posts: 27
Joined: Wed Aug 30, 2006 10:45 am

Post by blown26paj »

the magna ecu will not cope with anymore than 2psi boost you will need a aftermarket ecu.
supercharged nb paj swb f&r lockers,3.0 nh paj swb arb lockers,nl lux pack 2.8 paj lwb front locker
Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests