Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Few questions on 105 series suspension

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 101
Joined: Sat Feb 21, 2009 8:27 am
Location: Brisbane

Few questions on 105 series suspension

Post by Feass »

Hey,

I have a HZJ105 with the solid axle front end. I have a 4" EFS lift with steering damper as well. I just bought the car, with the lift already installed.

Just went to Fraser island for a few days, when i got back, i noticed the rear drag link (hub to hub) was rubbing up against the two arms that go from the axle to the chassis? I have never noticed it before, i'm sure they are not meant to be rubbing on each other! I happens on hard lock both ways mainly.

Just wondering what the go is with it?
Top
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

Perhaps you have castor plates intalled that attempt to keep the original castor settings.. This brings the tie rod closer to control arms.. Maybe you have bad control arm bushings.. Perhaps some drop arms are in order.. Who knows, post up some pics..
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests