Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Body Lift Engineering and insurance Requirements

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 17
Joined: Thu Nov 26, 2009 7:10 pm
Location: Brisbane

Body Lift Engineering and insurance Requirements

Post by callumm »

Hey all. I was wondering if anyone could tell me what is required as far as legal requirements and engineering certificates when fitting body blocks. I live in brisbane. So do i have to get 2 inch blocks engineered and if so where can i get it done?
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Body Lift Engineering and insurance Requirements

Post by bogged »

speak with an engineer.
Top
Posts: 45
Joined: Mon Mar 30, 2009 1:34 am
Location: Gove, NT

Post by Braddels »

In QLD 50mm is all you are allowed in body lift height without engineering cert. you go to the RTA and they give you a form. You detail all the information about what type of blocks, bolts, nuts etc... they then approve it or not. Then as your lift is now not a road worthy issue ( if done corretly) insurance should not be a problem. Somebody correct me if I am on the wrong path but this is the way I read it when I was looking at a BL for my truck. :)
Top
Posts: 17
Joined: Thu Nov 26, 2009 7:10 pm
Location: Brisbane

Post by callumm »

Thanks guys. I got my blocks today so i will go and see qld transport on monday to check it all out.
Top
Posts: 8
Joined: Fri Nov 13, 2009 9:05 am
Location: Deception Bay

Post by QLD4x4 »

QLD Transport allows for a 2" body lift and a 2" suspension lift, no engineering required.....
QLD 4x4
1, 22-24 Imboon Street, Deception Bay, QLD
Tel: 07 3293 4944
Top
Posts: 316
Joined: Thu Jan 10, 2008 5:24 pm
Location: QLD

Post by Ridge »

QLD4x4 wrote:QLD Transport allows for a 2" body lift and a 2" suspension lift, no engineering required.....
2" body as long as it is approved by qld transport. suspension is 1/3 of the stock wheel travel in one direction either up or down.
4age zook ute in lots of bits
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest