Hi all,
I have just replaced the centre bearing in my VZN167R hilux.. Unfortunately I forgot to check which way up the bearing goes. As in, its on the shaft the right way round but the bearing flange is offset and can bolt onto the body either way; I'm not sure which way is up. Is the bearing meant to sit higher or lower?
Cheers,
Andrew
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hilux Centre Bearing
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 0 guests