Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tigerz11 New 9000lb Two Speed Winch

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 123
Joined: Thu Apr 03, 2008 11:23 am
Location: mooroolbark Victoria

Tigerz11 New 9000lb Two Speed Winch

Post by tigerz11 »

ANYONE INTERESTED IN VIEWING THE OPERATION OF IT CLICK ON THE LINK BELOW



http://www.youtube.com/watch?v=Y1prQJHgH_8



Regards Paul
Top
User avatar
DamTriton
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

Since you obviously have power to the hand controller, may I suggest incorporating a 1-3 watt LED torch into the controller so you can see what you are doing at night??? On the same note, using red lights on the controller rather than green will not bugger up your night vision.

Marketing point of difference....
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 1245
Joined: Fri May 02, 2003 4:28 pm
Location: Kyrgyzstan

Contact:
Contact me3@neuralfibre.com

Post by me3@neuralfibre.com »

I'd love to see the split parts of the torque limiter.

I reckon it's great. If only I didn't already have a winch

Course it could be better - it could be hydraulic..... :)

Thanx
Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

i want one, but in 12000lb...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 1245
Joined: Fri May 02, 2003 4:28 pm
Location: Kyrgyzstan

Contact:
Contact me3@neuralfibre.com

Post by me3@neuralfibre.com »

macca81 wrote:i want one, but in 12000lb...
Bugger 12,000 - too heavy.
HP counts. lb is just ratio's. Use a pulley block and you get 18,000lb
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

me3@neuralfibre.com wrote:I'd love to see the split parts of the torque limiter.

I reckon it's great. If only I didn't already have a winch

Course it could be better - it could come with a free bag of rivets..... :)

Thanx
Paul





had to be done.....sorry.





looks good. and keep it electric ;)
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

I like! :cool:
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

me3@neuralfibre.com wrote:
macca81 wrote:i want one, but in 12000lb...
Bugger 12,000 - too heavy.
HP counts. lb is just ratio's. Use a pulley block and you get 18,000lb
im lazy, i cant be bothered with blocks... anyway, the tigerz 1200lb is still light with the rope...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 71
Joined: Sun Oct 28, 2007 8:45 am
Location: Castle Hill NSW

Looks good

Post by vk2icj »

If I didn't have a winch already I'd sure be thinking about this one. Looks the goods
Top
Posts: 1245
Joined: Fri May 02, 2003 4:28 pm
Location: Kyrgyzstan

Contact:
Contact me3@neuralfibre.com

Post by me3@neuralfibre.com »

joeblow wrote:
me3@neuralfibre.com wrote:I'd love to see the split parts of the torque limiter.

I reckon it's great. If only I didn't already have a winch

Course it could be better - it could come with a free bag of rivets..... :)

Thanx
Paul





had to be done.....sorry.





looks good. and keep it electric ;)
Of course the suzuki boys love it. It's got a gear for recovering landcruisers and another gear for recovering suzuki's.

Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Top
User avatar
DamTriton
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

me3@neuralfibre.com wrote:
joeblow wrote:
me3@neuralfibre.com wrote:I'd love to see the split parts of the torque limiter.

I reckon it's great. If only I didn't already have a winch

Course it could be better - it could come with a free bag of rivets..... :)

Thanx
Paul





had to be done.....sorry.





looks good. and keep it electric ;)
Of course the suzuki boys love it. It's got a gear for recovering landcruisers and another gear for sling-shotting suzuki's.

Paul
Fixed :D :D
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Contact:
Contact Suspension Stuff

Post by Suspension Stuff »

For the Brisbane people who want to see one in the flesh, we have one in the shop at Springwood.

Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Top
Posts: 302
Joined: Sun Feb 04, 2007 8:37 pm
Location: Bendigo

Post by krusty182 »

0:57 Got hold of the rope point blank and goes to spool out at high speed, but momentarily touches on the spool in button first.
Could be real nasty if you stuffed up the direction. :?
---> insert witty remark here <---
Top
Posts: 34
Joined: Sun Oct 07, 2007 9:27 am
Location: north bris

Post by blacklion »

i'm up for a new winch in the new yr, does it come in 24v????
Top
Posts: 123
Joined: Thu Apr 03, 2008 11:23 am
Location: mooroolbark Victoria

Post by tigerz11 »

krusty182 wrote:0:57 Got hold of the rope point blank and goes to spool out at high speed, but momentarily touches on the spool in button first.
Could be real nasty if you stuffed up the direction. :?
Yes your right ,,i can give you a perfect example of something your talking about ,,,im in my brand new ford when i started the car up i put it into reverse instead of drive took off because i was in a hurry and bang smashed straight thru the side of the house,,i rang ford and told them of this possible error in the vehcile ..all they told me i was a f#$%k wit.

Love Smart Arse
Paul
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

tigerz11 wrote:
krusty182 wrote:0:57 Got hold of the rope point blank and goes to spool out at high speed, but momentarily touches on the spool in button first.
Could be real nasty if you stuffed up the direction. :?
Yes your right ,,i can give you a perfect example of something your talking about ,,,im in my brand new ford when i started the car up i put it into reverse instead of drive took off because i was in a hurry and bang smashed straight thru the side of the house,,i rang ford and told them of this possible error in the vehcile ..all they told me i was a f#$%k wit.

Love Smart Arse
Paul


:rofl: :rofl: :rofl: :rofl:
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 302
Joined: Sun Feb 04, 2007 8:37 pm
Location: Bendigo

Post by krusty182 »

Chill out, I watched the video again, even if you had hit the wrong button by accident it probably wouldn't be that bad because you didn't have the winch bolted down and it has no tie rod along the bottom to get caught in.

I just hate to see people get complacent about having their hands so close to something that has that much pulling power, especially when it moves as quick as this one does.

Looks like a great unit, though. Merry Christmas.
---> insert witty remark here <---
Top
Posts: 363
Joined: Mon Apr 17, 2006 8:21 pm
Location: melbourne

Post by mmaaxx »

that winch looks good...whats the price on it compared to the normal tigerz2 winches?
[url]http://www.monsterrides.com.au[/url]
Top
Posts: 1245
Joined: Fri May 02, 2003 4:28 pm
Location: Kyrgyzstan

Contact:
Contact me3@neuralfibre.com

Post by me3@neuralfibre.com »

Hey Tigerz

I notice in the vid it stops alomost instantly - electromagnetic braking like my battery drill I take it.

Any details?

Thanx
Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Top
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Contact:
Contact Suspension Stuff

Post by Suspension Stuff »

mmaaxx wrote:that winch looks good...whats the price on it compared to the normal tigerz2 winches?
At the moment they are about $50 dearer then the 12000lb.
You can check out a price comparison here. https://www.suspensionstuff.com.au/shop ... ath=63_255

Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Why have the adjustable Tourque Limiter if your telling people to not touch it?
Top
Posts: 363
Joined: Mon Apr 17, 2006 8:21 pm
Location: melbourne

Post by mmaaxx »

I was thinking the same thing....if you had this on a lighter vehicle couldnt you set it lower so as not to overload the unit, just in case...isnt that what its for?
[url]http://www.monsterrides.com.au[/url]
Top
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Contact:
Contact Suspension Stuff

Post by Suspension Stuff »

I was thinking that if you had a smaller 4WD and you didn't want to over stress the vehicle.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Top
Posts: 123
Joined: Thu Apr 03, 2008 11:23 am
Location: mooroolbark Victoria

ATL

Post by tigerz11 »

RUFF wrote:Why have the adjustable Tourque Limiter if your telling people to not touch it?
THE REASON I SAID THAT ,,people who actually know what there doing ,NO PROBLEM ,,but imbosiles loving fidling around with things ..at a guess move it,,, forget that they have moved it ,,never read a manual ,,then say ah mate the winch is crap wont pull anything ,,,,,,,,i have been thru these types of things many times over ,,



Regards Paul
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

Your last model Tigerz11 is still working a treat.
I rate it.
not that i ever have to winch......... :oops:
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Contact:
Contact Suspension Stuff

Post by Suspension Stuff »

DIRTY ROCK STAR wrote:Your last model Tigerz11 is still working a treat.
I rate it.
not that i ever have to winch......... :oops:
You will have to find some harder tracks :twisted:
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Suspension Stuff wrote:
DIRTY ROCK STAR wrote:Your last model Tigerz11 is still working a treat.
I rate it.
not that i ever have to winch......... :oops:
You will have to find some harder tracks :twisted:
He doesnt need harder tracks its usually there is an excavator close enough to lift him out :finger:
Top
Posts: 75
Joined: Fri Aug 22, 2008 7:25 pm
Location: NEWCASTLE

Post by TROY_86 »

RUFF wrote:
Suspension Stuff wrote:
DIRTY ROCK STAR wrote:Your last model Tigerz11 is still working a treat.
I rate it.
not that i ever have to winch......... :oops:
You will have to find some harder tracks :twisted:
He doesnt need harder tracks its usually there is an excavator close enough to lift him out :finger:
RUFF for the win :armsup:

twan :finger: :finger:
Top
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Contact:
Contact Suspension Stuff

Post by Suspension Stuff »

You guys might be interested in this comp http://www.outerlimits4x4.com/ftopic195619.php

A fast winch might come in handy.

The winner might get themselves this winch.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Top
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

Suspension Stuff wrote:You guys might be interested in this comp http://www.outerlimits4x4.com/ftopic195619.php

A fast winch might come in handy.

The winner might get themselves this winch.
LOL Shane do you realise who you are talking to?

Twon's in Newcastle and his "Megatwon" has too much "Bling" as he calls it to work.
And RUFF is "old" (as he put it at lunch the other day) so i doubt he's be keen :finger:
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 135 guests