Is it difficult to rebuild a steering box? Its a v8
Is the info on how to do it available in the workshop manual from the local library, is anyone aware? I've spent a lot of $s on this car and want to save some on this job if i can.
Any input appreciated
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Leaking steering box in 97 disco
Moderator: Micka
It CAN be done.... But most people who attempt to do it at home end up going for a reco box changeover. Problem is that half the bits inside are probably flogged out......
Was actually looking this up yesterday, as I've got movement in a part of my reco steering box that I'm sure shouldn't really move, and came across a PDF file of the procedure. It was for a classic Rangie, but should be the same....
http://www.scribd.com/doc/23074934/1995 ... al-PART-II
On page 45 begins the overhaul procedure...
Was actually looking this up yesterday, as I've got movement in a part of my reco steering box that I'm sure shouldn't really move, and came across a PDF file of the procedure. It was for a classic Rangie, but should be the same....
http://www.scribd.com/doc/23074934/1995 ... al-PART-II
On page 45 begins the overhaul procedure...
84 Rangie, 3 inch spring lift, 2 inch body, Megasquirted 4.6, R380, rear Maxi, 34x11.5 JT2s. Simex FM installed.
Who is online
Users browsing this forum: No registered users and 20 guests