Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2005 jimny tail shaft troubles chasing ideas

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 18
Joined: Fri Nov 13, 2009 9:26 pm
Location: Rockhampton

2005 jimny tail shaft troubles chasing ideas

Post by chase.rawlings »

hay hay i have lifted my 2005 jimny with 5in coils.. i have rolled the front diff with making new radius arms and simular at the rear.. i was having rear tail shaft angle problems with grinding and shaking.. so i dropped the transfer case 30 mm to help the prob and put half inch spacer on the tail shaft... but still haveing dramas with vibrations anyone got any ideas? or had this come up with lifting there jimny?? i was thinking center bearing tail shaft?? yes no open to ideas thanks
Top
Posts: 12
Joined: Wed Aug 26, 2009 8:05 pm
Location: Brisbane

Post by zukenutter »

5in coils are going to put the CV and Uni at pretty acute angles. The spacer will only be making these angles worse as it will shorten the distance between the Tcase and diff. being that the rear axle rotates on a similar plain to the shaft I'd expect that it's the CV at the Tcase end of the shaft.
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

you could use a double cardan joint on the tcase end of the shaft. Worked great for me.
The worst thing about censorship is ███████.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 5 guests