Page 1 of 1

stainless snorkel elbows?

Posted: Wed Jan 06, 2010 10:14 pm
by davegh2o
Hey all,

What sort of shop stocks the big 3'' black elbows for the stainless snorkels?

I have everything else but can't, for the life of me, find someone that stocks the elbows?

Any help would be appreciated. In Townsville would be even better still.

Regards Dave.

Posted: Thu Jan 07, 2010 6:55 am
by 8maddog8
I heard people get them from truck spares places. You could go ebay if you wanted silicone ones.

Posted: Thu Jan 07, 2010 3:31 pm
by vanbox
truck spares, will have them or can get them.

Posted: Thu Jan 07, 2010 4:03 pm
by Feenz
Hey Dave eat a dick....

SS

Posted: Thu Jan 07, 2010 7:42 pm
by Clanky
Any decent metal shop or fabricator can get them.
Or have a search on the net for mandrel bends
I found this one that sells direct and can post
http://www.smb.net.au/mandrelbends.htm# ... drel_Bends

Posted: Thu Jan 07, 2010 9:51 pm
by nastytroll
QDS

Posted: Fri Jan 08, 2010 5:33 am
by msjc38
I think I have seen them at pirtek

Posted: Sat Feb 06, 2010 8:37 pm
by Insano
I got mine from Hitachi on Duckworth Street. Think they are about $30 each. Also found they were the cheapest for Donaldson Air Rams. [/img]

Posted: Sat Feb 06, 2010 8:50 pm
by PBBIZ2
I got mine off ebay, approx $10 from memory for a 90 degree 65mm bend in SS 304, and about the same for 45 deg bend as well.

Posted: Mon Feb 08, 2010 8:52 am
by mhgill
any truck exhaust shop